Meters and Measurement Devices for Exact Consumption Data Acquisition Manufacturer

Meters and Measurement Devices for Exact Consumption Data Acquisition

Request a Quote

Website: http://bcenergymeter.com/1-1-1-4-ultrasonic-heat-meter-270-flange-type.html

The ultrasonic heat meter, 270 series (cast iron, flange type) adopts a single-channel line and circle aluminum integrator with higher protection grade for the measurement and display of heat absorbed by the flow water. The vertical integrator offers convenience for users to read data.

Basic Controls uses a cast iron made meter line to enable the ultrasonic heat meter to maintain outstanding physical and mechanical properties. Besides, this series heat meter is connected by flange to facilitate the installation and disassembly.

Parameters

Line material: cast iron
Connection type: flange type
Nominal diameter range: DN50-DN200
Pressure rating: PN16/PN25
Water-proof grade: IP65
Power supply: M-BUS built-in lithium battery or DC240V built-in lithium battery or built-in lithium battery

External dimension

Flow code	Nominal diameter DN	Height H	Flange outer diameter D	Length L	Bolt circle diameter D1	Bolt number on each side- thread n-M	Overload flow rate	Normal flow rate	Minimal flow rate
N15	50mm	335mm	165mm	200mm	125mm	4-M16	30qmax(m³/h)	15qp(m³/h)	0.3qmin(m³/h)
N 25	65mm	350mm	185mm	200mm	145mm	8-M16	50qmax(m³/h)	25qp(m³/h)	0.5qmin(m³/h)
N 40	80mm	365mm	200mm	250mm	160mm	8-M16	80qmax(m³/h)	40qp(m³/h)	0.8qmin(m³/h)
N60	100mm	395mm	220mm	250mm	180mm	8-M16	120qmax(m³/h)	60qp(m³/h)	1.2qmin(m³/h)
N100	125mm	415mm	250mm	250mm	210mm	8-M16	200qmax(m³/h)	100qp(m³/h)	2.0qmin(m³/h)
N150	150mm	445mm	285mm	300mm	240mm	8-M20	300qmax(m³/h)	150qp(m³/h)	3.0qmin(m³/h)
N250	200mm	490mm	340mm	350mm	295mm	12-M20	500qmax(m³/h)	250qp(m³/h)	5.0qmin(m³/h)