Die Spotting Press YC High Precision Series Manufacturer

Die Spotting Press YC High Precision Series

: http://moldpresscn.com/1-1-die-spotting-press-yc-high-precision-series.html

A reasonably designed die spotting press makes the inspection and repair of complex molds much easier.

The YC die spotting press features a high precision, and is equipped with four spotting oil cylinders arranged in a square. This ensures a more uniform mold plate force, and a smaller deformation coefficient. All of these are not things found in a traditional spotting machine where the spotting oil cylinders are arranged in a line.

We provide 9 types of die spotting presses, with the pressure ranging from 68T to 600T, thus ensuring they can handle multiple mold types, including die casting molds, injection molds, stamping molds and more.

Type selection
According to different pressure capacities, we offer 9 different machine types, with a size varying from 68T to 600T. The mixed mold size they can process is 1.5m×1.2m.

Die spotting presses are large scale equipment. A small die spotting press requires less land, and stands at a height of less than 4m. However, the largest option features a length and height close to 10 meters. Therefore customers must pay attention to their requirements and space when choosing an equipment piece.

68T-300T Die Spotting Press

Type		68JM-YC	100JM-YC	160JM-YC	200JM-YC	300JM-YC
Pressure capacity	T	68	100	160	200	300
Open capacity	T	22	25	38	45	56
Ejecting capacity	T	2.2	2.2	6.3	6.3	6.3
Min distance between two workbenches	mm	150	200	200	200	200
Max distance between two workbenches	mm	1150	1500	1700	1900	2300
Dimension of work bench	mm	1000×800	1400×1100	1600×1300	1800×1500	2200×1800
Oventurn capacity	T	2.5	4	8	10	18
Carrying capacity of workbench	T	4	8	16	20	36
Shift-out stroke of lower workbench	mm	2170	2950	3210	3620	4365
Ejection shroke	mm	220	220	300	300	300
Overturn angle of upper workbench	°	180	180	180	180	180
Motor power	kW	11	15	18.5	22	30
Min mold size(length×width)	mm	300×300	400×400	500×500	540×540	650×650
External dimension length×width×high	mm	4185×1770×3690	5380×2325×4630	5580×2590×5240	6250×2790×5695	7410×3400×6860
Weight	T	9.4	19	26	31	52

300T-600T Die Spotting Press

Type		350JM-YC	400JM-YC	500JM-YC	600JM-YC
Pressure capacity	T	350	400	500	600
Open capacity	T	70	80	120	150
Ejecting capacity	T	11.2	11.2	21.5	21.5
Min distance between two workbenches	mm	400	400	400	400
Max distance between two workbenches	mm	2500	2500	3000	3200
Dimension of work bench	mm	2800×2000	3000×2000	3100×2100	3500×2500
Oven turn capacity	T	25	25	30	35
Carrying capacity of workbench	T	50	50	60	70
Shift-out stroke of lower workbench	mm	4800	4800	4980	5980
Ejection stroke	mm	300	300	350	350
Overturn angle of upper workbench	°	180	180	180	180
Motor power	kW	37	45	45	55
Min mold size(length×width)	mm	850×850	1000×850	1000×850	1500×1200
External dimension length×width×high	mm	8080×4190×7205	8120×4470×7405	8410×4610×8525	9825×5080×9275
Weight	T	75	87	112	137

Note: The technical parameters are subject to change without prior notice.

Reliable work
During the spotting process, operators need to simply place two molds on the rolling bolster and upper platen, respectively. When the molds are fixed in place using a hydraulic clamping system, the equipment will begin to operate. The rolling bolster moves forward, while at the same time, the upper platen moves upwards and reverses to 180 degrees. By doing so, the two piece mold will effectively complete spotting in their positions.

High spotting precision
Four guide pillars ensure the entire unit is stable and reliable, and the parallel position of the mold can be adjusted simply by shifting the guide pillar nut positions, thus ensuring a high spotting precision. We also use an elastic mold plate to guarantee the high spotting precision under a high pressure.

Complete protective measures
Once the rolling bolster returns to its original position, our hydraulic machinery safety will attach and lock it automatically, which makes mold and machinery operation safer and more secure.

Optional device

Servo drive system
Serve driving using an optional servo motor can help reduce the die spotting press' oil temperature and energy consumption.

Magnetic mold plate
Magnetic mold plates can be used in conjunction with the die spotting press in order to achieve a reliable and fast die change.

Hydraulic clamping system
We offer a variety of hydraulic clamping systems that match the die spotting press, thus helping customers achieve a fast, reliable die change.