Horizontal Lathe
HorizontalLathe
,
The horizontal lathe is designed forturning excircle, innerbore, face, cutting metric, Whitworth, modulus,
Technical Parameters
Model | CD6250 |
Max. Distance between Centers | 1000/1500/2000mm |
Max. Swing over Bed | 500mm |
Max. Swing over Tool-post | 280mm |
Max. Swing over Gap | 750mm |
Spindle Bore Diameter | 85mm |
Effective Length of Gap | 240mm |
Taper of Spindle Bore | 1:20 |
Spindle Speed Number and Range | 12/21~1500rpm |
Number of Spindle Cross/Longitudinal Feed | 138 |
Spindle Longitudinal Feeding Range | 0.04~2.23mm/r |
Spindle Cross Feeding Range | 0.02~1.12mm/r |
Metric Thread Number/Pitch Range | 32/0.9~40mm |
Whitworth Thread Number/Pitch Range | 32/40~1t.p.i |
Modulus Thread Number/Pitch Range | 24/0.45~10mm |
Diametral Thread Number/Pitch Range | 30/DP 80~1.75 |
Max. Travel of Cross Tool-post | 340mm |
Max. Travel of Upper Tool-post | 150mm |
Tool Post Swiveling Angle | ±45° |
Power of Apron Rapid-travelled Motor | 250W |
Speed of Carriage Rapid-travelled Motor | 4000mm/min |
Main Motor Power | 7.5kW |
Cool Pump Power | 90W |
Ourhorizontal lathe has a large spindle bore, and the machine guide rail isprocessed by super audio which makes it hardened and fine ground. This productgenerates low noise and it is easy to operate. Meanwhile, the rigidity is good,and the machining process is very precise.