Fluorocarbon Elastomers

Fluorocarbon Elastomers

This product has been discontinued and removed from our shelves.

Applications

Our fluorocarbon elastomers are synthetic rubber suited to produce a variety of O-rings, washers, gaskets and other products whose color and performance are not critical.

Features
  • Rapid vulcanization;
  • Easy de-molding;
  • Good resilience;
  • Cost effective
Approvals

ROHS, etc.

Test

50% DBPMH (2,5-Dimethyl-2,5-di-(tert-butylperoxy) hexane), addition 1.5%, 175℃×5min×15Mpa

Technical Data
  • Model: HT-8150F
  • Appearance: Translucent
  • Processability: 220-240
  • Hardness (Shore A): 50
  • Density (g/cm3): 1.4
  • Tensile strength (Mpa): 6
  • Elongation (%): 320
  • Tear strength (K N/m): 17
  • Model: HT8160F
  • Appearance: Translucent
  • Processability: 230-260
  • Hardness (Shore A): 60
  • Density (g/cm3): 1.5
  • Tensile strength (Mpa): 6
  • Elongation (%): 230
  • Tear strength (K N/m): 15
  • Model: HT-8170F
  • Appearance: Translucent
  • Processability: 260-280
  • Hardness (Shore A): 70
  • Density (g/cm3): 1.6
  • Tensile strength (Mpa): 6
  • Elongation (%): 140
  • Tear strength (K N/m): 13
  • Model: HT-8180F
  • Appearance: Translucent
  • Processability: 250-280
  • Hardness (Shore A): 80
  • Density (g/cm3): 1.6
  • Tensile strength (Mpa): 6
  • Elongation (%): 130
  • Tear strength (K N/m): 12
  • Model: HT-8190F
  • Appearance: Translucent
  • Processability: 260-290
  • Hardness (Shore A): 90
  • Density (g/cm3): 1.6
  • Tensile strength (Mpa): 6
  • Elongation (%): 120
  • Tear strength (K N/m): 11
Send Message