Smart Horizontal Single Axis Tracking Solar PV Mounting System
This solar panel mounting and tracking system is an independently developed product applicable for large solar power plants. It’s widely-used in low latitudes and can work well at temperature between -40°C to 85°C. The solar panel mounting and tracking system allows one or more photovoltaic arrays to track with sun movements automatically with the use of a slewing drive and control system. It is equipped with a tracking system at a ±45° tracking angle and GPS system to obtain an accurate time and carry out communication across long distances for solar module control. This tracking system is equipped with vents between the solar panels in order to reduce the wind load, and enhance the balance. The annual capacity of this solar tracking system is 20 points higher than traditional ground mount solar racking systems, making it ideal for large solar power plants.
- Ground-Mounted System
- Tracking Angle: ±60°
- Ground Clearance :400mm
- Applicable Solar Panels: framed panels & frameless panels
- Solar Panel Layout: horizontal panel installation & vertical panel installation
- Quality & Warranty
| Product Name | Smart Tilt Single Axis Tracking Solar PV Mounting System | Support Mode | Wind Protection Mode, Night Returning Mode |
| GPS Module | Obtaining Longitude , Latitude and Accurate Time Automatically, Be Compatible With BeidouNavigation System | Downpour Cleaning Mode | |
| Capacity | ＜25KWP | Snow Cleaning mode | |
| Tracking Angle | ±60° | Transmission Device | Slewing Drive |
| Resistance of Wind | ＜22m/S | Rack Material | Q235B (Hot-Dip Galvanizing) , Al6005-T5 (Surface Anodic Oxidation） |
| Tracking Algorithm | Astronomical Algorithms & Obliquity Sensor With Tracking Angle of ±1° | Controlling System | SCM |
| Ground Clearance | 400mm | Protection Class | IP65 |
| Power Supply | DC24V | Warranty Period | 15 years |
- TUV Test
- Patent
- AS NZS 1170 Certificate
- SGS Material Analysis
- ISO 9001 Certification
- SAAEA
1.End Clamp 2.Mid Clamp 3.Post 4.Motor Base 5.Bearing Base 6.Motor
Installation Steps
