Rollover Car Wash Machine CF-300 (Japanese Type)
The Japanese type car wash system (CF-300) is the first car wash equipmentRisense introduced from Japan, and it features two powerful air mute dryers. The contour-following dryer can follow the contours of vehicles to blow water off the surface. The contour tracking system can achieve a better drying effect. The below table shows further details about this Japanese type car wash system.
Parameters
Model | CF-300 |
Dimension | L*W*H: 2.61m×3.6m×2.815m |
Rail length:8.2m Rail distance:3.2m Diagonal brace bracket: 2.86m | |
Assembling Range | L*W: 10070mm×3700mm |
Moving Range | L*W:10470mm×3700mm |
Voltage | Voltage AC380V50Hz Capacitance 15KVA (Total Power: 8.4KW) |
Water Supply | DN25mm Water flow rate≥80L/min |
Air Pressure | 0.75~0.9Mpa Air flow rate≥0.1m³/min |
Ground Flatness | Deviation≤10mm |
Applicable Vehicles | Sedan/jeep/minibus within 10 seats |
Applicable Car Dimension | L*W*H: 5.2m×2.15m×2.27m |
Washing Time | 1 rollover 2'45''/ 2 rollover 3'25'' |
Advantages
- Fully-automatic PLC electronic control system improves the security.
- The corrosion resistance of the galvanized door-shaped frame of the vehicle washing equipment is the 10-20 times that of hot galvanized plate, increasing the service life.
- Two powerful air mute dryers and contour-following drying system improves the drying effect.
- Foam and water wax proportioning system is easy to operate.
- Two-Click washing method simplifies operations.
- Built-in self-diagnose system can recognize and remove obstacles during car washing.
Configurations
Standard Devices | Optional Devices |
Shampoo spray system | Undercarriage wash system |
Water wax spray system | Voice prompt system |
Contour-following drying system | High-pressure water system |
Brush system |
Related products
Send Message
Most Recent
More
Other Products
Videos