Small Threaded Mechanical Branch Tee
Product Introduction
Mechanical tees are pipe fittings that are used in place of full flow cast fittings. The small threaded mechanical tee is cast from ductile iron in two equal halves: one being the outlet, the other being the strap. An over-sized hole is drilled or cut into the pipe at the location where the branch or device is needed. The threaded mechanical tee is assembled around the pipe, positioning the collar inside the hole, then enclosing a resilient rubber gasket suitable for that particular piping system. The bolts are then fastened, making the branch more secure. Mechanical tees are intended to connect piping directly into the system. Fitting outlets are supplied with female pipe threads (FPT) or grooved pipes. These are labor saving pipe fittings that are designed to provide excellent flexibility and cost savings to contractors, both in the labor and materials. There is no flame required to cut the hole or assemble the threaded mechanical tee, making it a great choice for retrofit and MRO work.
Mechanical Tee Threaded
Ductile iron construction
Lead free orange paint
Conforms to ASTM A536 standards
UL Listed, FM approved
| Nominal Size mm/in | Hole Dim. mm/in | Dimensions | Bolt size | Working pressure (psi) | ||
| A | L | H | ||||
| mm | mm | mm | inch/mm | |||
| 32×15 | 30.00 | 98 | 65 | 45 | 3/8×1-1/2 (M10×40) | 300 |
| 11/4x1/2 | 1.18 | |||||
| 32×20 | 30.00 | 98 | 65 | 45 | ||
| 11/4x3/4 | 1.18 | |||||
| 32×25 | 30.00 | 98 | 65 | 54 | ||
| 11/4x1 | 1.18 | |||||
| 40×15 | 30.00 | 105.6 | 65 | 48 | ||
| 11/2x1/2 | 1.18 | |||||
| 40×20 | 30.00 | 105.6 | 65 | 48 | ||
| 11/2x3/4 | 1.18 | |||||
| 40×25 | 30.00 | 105.6 | 65 | 57 | ||
| 11/2x1 | 1.18 | |||||
| 50×15 | 30.00 | 120 | 56 | 53 | 3/8×2-1/8 (M10×55) | |
| 2x1/2 | 1.18 | |||||
| 50×20 | 30.00 | 120 | 56 | 54 | ||
| 2x3/4 | 1.18 | |||||
| 65×15 | 30.00 | 139 | 56 | 61 | ||
| 21/2x1/2 | 1.18 | |||||
| 65×20 | 30.00 | 139 | 56 | 61 | ||
| 21/2x3/4 | 1.18 | |||||
LEDE company design and manufacture grooved piping system jointing fittings, is a leading China threaded mechanical branch tee manufacturer and supplier, provide pipe jointing and flow control products of fire protection system and water work system. There are different sizes of mechanical branch tee fittings for grooved piping system, made in accordance with UL, CE, ISO certificates, etc. Engineered with complete automation equipment and manufacturing expertise, LEDE company provides quality ductile iron threaded mechanical tee as well as custom firefighting and water supply solutions based on the client needs.
