Rollover Car Wash Machine CF-360 (EU Type)
The car wash system EU type (CF-360) is a car wash machine with tire brushes, which clean the tires during the washing process, improving the car washing completeness. The double powerful mute dryers are used to increase the drying performance. The table below shows the basic information about the car wash system EU type.
Parameters
| Model | CF-360 |
| Dimension | L*W*H: 2.4m×3.6m×2.9m |
| Rail length: 9m Rail distance: 3.2m | |
| Assembling Range | L*W*H:10m×3.7m×3.1m |
| Moving Range | L*W: 10000mm×3700mm |
| Voltage | Voltage AC380V 50Hz Capacitance 12KVA |
| Water Supply | DN25mm water flow rate≥80L/min |
| Air Pressure | 0.75～0.9Mpa air flow rate≥0.1m3/min |
| Ground Flatness | Deviation≤10mm |
| Applicable Vehicles | Sedan/jeep/minibus within 10 seats |
| Applicable Car Dimension | L*W*H: 5.4m×2.1m×2.1m |
| Washing Time | Normal washing: 3'20'' Fine washing: 7'10'' |
Advantages
- Fully automatic: microcontroller unit (MCU) ensures high efficiency and low failure rate, and allows for remote upgrading.
- The corrosion resistance of the galvanized door-shaped frame of the vehicle washing equipment is the 10-20 times that of hot galvanized plate, increasing the service life.
- Two powerful air mute dryers can follow contours of vehicles to improve the drying effect.
- Foam and water wax proportioning system is easy to operate.
- Two-Click washing method simplifies operation.
- Built-in self-diagnose system can recognize and remove obstacles during car washing.
Configurations
| Standard Devices | Optional Devices |
| Shampoo spray system | Undercarriage wash system |
| Water wax spray system | Automatic washing mode |
| Side and overhead contour-following drying system | |
| Equipment data intellectualization | |
| Self-diagnose system |
Related products
Send Message
Most Recent
More
Other Products
Videos
