DC MMA Welder with Iron Core
The DC MMA welder with iron core applies the iron type, forced air cooling structure. It can use any brand welding electrode for the direct, manual electric arc welding and metal filling. Welding machine of ZX1 series is characterized by low power consumption, fast arc striking, stable electric arc, wide current adjustment, etc. It is suitable for the welding of low-carbon steel, low allow structural parts. High power model can be used as arc cutting equipment.
Features
1. Iron core of main transformer is ring-shaped. The coil is varnished wire added with Teflon belt for reinforced insulation. Therefore, this DC MMA welder with iron core can be used even in the low-temperature environment or humid environment.
2. The AC welding machine is adapt to the environment temperature up to 45°C, 5°C higher than the national standard temperature 40°C. It works normally even in the outdoor environment.
3. P plate has gone through the moisture-proof processing. The whole plate has been immersed in the rubber for 3 times. All the parts including surface welding point are protected by insulation film.
4. The DC MMA welder applies the simplified main circuit design, as it has no AC contactor. The buffering circuit is changed from resistance capacity type to buffer capacitor, avoiding the IGBT damage caused by buffer circuit failure.
Parameters
| Model | ||||
| Power Voltage/Frequency | 380V/50Hz | |||
| Phase Number | 3 | |||
| Rated Input Capacity | 25KVA | 30.4KVA | 38.3KVA | 69.3KVA |
| Rated Duty Cycle | 35% | 60% | ||
| No Load Voltage | 63~71V | 65~73V | ||
| Rated Input Current | 37.9A | 46.1A | 58A | 105A |
| Rated Duty Cycle | 35% | 60% | ||
| Current Adjust Range | 85~315A | 105~400A | 115~500A | 240~800A |
| Working Voltage | 32.6V | 36V | 40V | 44V |
| Electrode Diameter | 2.5~6mm | 3.2~7mm | 3.2~8mm | 8~16mm |
| Weight | 126KG | 142KG | 153KG | 257KG |
| Dimensions | 750×500×810(mm) | 740×550×1050(mm) | ||
