In-The-Hole Longhole Drilling Rigs, KSQ31 Manufacturer

In-The-Hole Longhole Drilling Rigs, KSQ31

: http://ksdrillmachine.com/1-3-down-the-hole-drilling-rigs.html

In-The-Hole Longhole Drilling Rigs, KSQ31

Dimensions (L×W×H): 5525×2375×2975mm
Weight: 10000 kg
Gradeability: 20°

Structure Diagram

Technical Specifications

Dimensions	Length 5525mm	Length of feed beam	3155mm
	Width 2375mm	Feed stroke	1355mm
	Height 2975 mm	Max. lifting force	25KN
Weight	10000 kg	Luffing mechanism
Gradeability	20°	Luffing angle of drill boom	Front20°/back65°
Travelling speed	1.5/3Km/h, double speed	Swing angle of drill boom	360°
Ground clearance	355mm	Ring angle	360°
Power		Parallel borehole range	3052mm
Diesel engine	Yuchai4DKC4G2-80	Electrical
Engine power	58kW	Working voltage	380V
Motor	Y250M-4	Starting method	Star/delta
Motor power	55kW	Length of reel cabling	80m
Drilling		Other
Rock hardness	f=6-20	Method of dust removal	Wet dust removal
Drilling diameter	Ø90-125mm	Air pressure	10-25bar
Depth of economical drilling	30m	Air consumption	10-22m/min
Drill rod diameter	Ø76mm	Operational mode	Hydraulic pilot cable remote control
Drill rod length	1.2m(open-hole drill rod 0.8m)		Hydraulic pilot cable remote control
Number of drill rods	24 1	Protective roof	Rockfall protection function
Rotation
Rotation speed	0-120rpm
Rotation torque	1900Nm

Features

Four stabilizer legs with independent hydraulic control ensures the high stability during drilling operations;
Hydraulic feed cylinders with direct force applied to ensure the smooth feed and high drilling accuracy;
Once it is setup, the hydraulic long hole drilling rig can drill parallel holes with a maximum width of 3052mm, greatly increasing the efficiency and accuracy of drilling works in worksites; The maximum width of the extraction face is 7942mm, and the maximum height is 4925mm;
The DTH drilling rig has 360-degree rotation function and hydraulic rotary table, enabling it to conquer underground confined spaces;
All key hydraulic components, electrical components, remote control unit and control buttons are from world's renowned brands to ensure the reliable performance under extreme working conditions;
Diesel engine makes the drilling rig able to perform walking and drilling operations in the underground working spaces in the absence of power source;
The operation of DTH drilling rig is carried out on the vehicle, thus securing operator's safety and giving a good visibility; The protective roof is equipped to guarantee that the operator is protected from roof falls;
Hydraulic pilot joystick control makes drilling operation easier;
Less hydraulic hoses applied in the drilling rig result in lower hydraulic losses and higher energy efficiency;
Hydraulic drive cable reel allows for installing cable of 80 meters in length;
Drill rod thread protection function helps reduce drill rod thread wear, thus significantly prolonging the service life of the drill rod;
One-key open hole drilling function enables the hydraulic long hole drilling rig to automatically lower the feed force, impact pressure and frequency, therefore increasing the drilling efficiency and hole straightness;
Anti-jamming system improves the drilling rig's adaptability to various difficulties in drilling operation;
The DTH drilling rig is equipped with hydraulic guiding system to ensure the hole straightness;
Cable remote control allows operator to perform driving and drilling far away from dangerous areas where rock falls;