PTFE Heat Shrink Tubing

PTFE Heat Shrink Tubing
PTFE Heat Shrink Tubing
PTFE Heat Shrink Tubing
Request a Quote

Model: CB-PTFE

    Material: Irradiated cross-linked modified PTFE

    Shrink ratio: 2:1

    Description
    PTFE heat shrink tubing can be used as coating for chemical accessories, thanks to its outstanding diesel resistance, acid resistance, alkali resistance and corrosion resistance properties, thus allowing it to be used as corrosion resistant heat shrink tubing. Used as insulating protection tubing, the zero halogen heat shrinkable tubing is designed to provide an excellent high temperature resistance, low temperature resistance and insulating coating for electrical components. The PTFE heat shrink tubing also provides coating to accessories such as rollers in many industries, including dyeing, printing, chemical and paper. Rollers protected by PTFE tubing have no sticky residue accumulation thanks to the tubing’s lubricity, and will have little to no impact on repeated mechanical component movement because of the tubing’s lower friction coefficient.

    Standard: AS23053/12

    Size
    Size Inside diameter Wall thickness after recovery (mm)
    Min. inside diameter as supplied Max. inside diameter after recovery
    Awg 30 0.8 0.38 0.23
    Awg 28 0.9 0.46 0.23
    Awg 26 1.1 0.53 0.25
    Awg 24 1.2 0.66 0.25
    Awg 22 1.4 0.81 0.30
    Awg 20 1.5 0.97 0.30
    Awg 18 1.9 1.17 0.30
    Awg 16 2.3 1.47 0.30
    Awg 14 3.0 1.83 0.30
    Awg 12 3.8 2.31 0.30
    Awg 10 4.8 2.84 0.30
    Awg 8 6.1 3.53 0.38
    Awg 6 7.6 4.41 0.38
    Awg 4 9.4 5.53 0.38
    Awg 2 10.9 6.93 0.38
    Awg 0 11.9 8.69 0.38

    Standard Color: Clear (Natural)
    * Other sizes are available upon special order

    Specifications
    Item Test method Unit Specifications
    Specific gravity ASTM D792 G/cm3 2.16
    Operating temperature -55℃ to 260℃
    Min. full recovery temperature: °C 327°C
    Tensile strength ASTM D638 M Pa 24.5
    Elongation at break ASTM D638 % 350
    Bending modulus ASTM D790 M Pa 490
    Impact strength ASTM D256 23℃-54℃j/m No crack
    Hardness (shore) ASTM D2240 Shore D 55
    Coefficient of dynamic friction 0.1
    Flammability UL-224 VW-1
    Dielectric constant 103-106hz ASTM D150 2.1
    Dielectric dissipation
    factor 106hz
    ASMT D150 0.0002
    Arc resistance ASMT D495 S ﹥300
    Linear coefficient of expansion ASTM D257 Ώ/cm ﹥1018
    Weather resistance "Weather-o-meter"(2000h) No crack
    Fluid resistance ASTM D543 Excellent
    Chemical resistance ASTM D543 Excellent
    Features
    • The operating temperature of this heat shrink tubing is -55℃~260℃.
    • The minimum shrink temperature of this heat shrink tubing is 327℃.
    Related Manufacturies
    Leave Message
    Inquiry
    Inquiry