High Transparent Precipitated Silicone Rubber for Extrusion
Applications
This transparent silicone rubber is perfect to be used in extrusion process to produce rubber sleeves, light strips, sealing strips, etc., it is also suitable for manufacturing products that have high requirements of transparency.
Features
- Fast extrusion;
- High size consistency;
- Excellent processability;
- Good transparency;
Approvals
ROHS, REACH, FDA, CA65, EN71-3, EN14372, PAHS, PFOA, CPSIA, siloxane testing, etc.
Test
Addition A type agent 0.5%, B type agent 0.8%, 120℃×3min×15Mpa
Technical Data
- Model:
HT-8132A - Appearance: Translucent
- Processability: 200-200
- Hardness (Shore A): 30
- Density (g/cm3): 1.12
- Tensile strength (Mpa): 7
- Elongation (%): 850
- Tear strength (K N/m): 15
- Model:
HT-8142A - Appearance: Translucent
- Processability: 220-240
- Hardness (Shore A): 40
- Density (g/cm3): 1.13
- Tensile strength (Mpa): 7
- Elongation (%): 750
- Tear strength (K N/m): 15
- Model:
HT-8152A - Appearance: Translucent
- Processability: 220-240
- Hardness (Shore A): 50
- Density (g/cm3): 1.14
- Tensile strength (Mpa): 7
- Elongation (%): 650
- Tear strength (K N/m): 15
- Model:
HT8162A - Appearance: Translucent
- Processability: 260-280
- Hardness (Shore A): 70
- Density (g/cm3): 1.2
- Tensile strength (Mpa): 7
- Elongation (%): 450
- Tear strength (K N/m): 15
- Model:
HT-8172A - Appearance: Translucent
- Processability: 260-280
- Hardness (Shore A): 70
- Density (g/cm3): 1.2
- Tensile strength (Mpa): 7
- Elongation (%): 450
- Tear strength (K N/m): 15
- Model:
HT-8182A - Appearance: Translucent
- Processability: 250-280
- Hardness (Shore A): 80
- Density (g/cm3): 1.2
- Tensile strength (Mpa): 7
- Elongation (%): 300
- Tear strength (K N/m): 15
- Model:
HT-8192A - Appearance: Translucent
- Processability: 260-290
- Hardness (Shore A): 90
- Density (g/cm3): 1.22
- Tensile strength (Mpa): 7
- Elongation (%): 200
- Tear strength (K N/m): 15
Related products
Send Message
Most Recent
More
Other Products
Videos
