UHMWPE Scraper Blade

: http://animalfeedcn.com/1-8-4-scraper-conveyor.html

Xinxing UHMWPE scraper blades are finely crafted and are available in a variety of lengths for efficient drum filter applications. Our UHMWPE scraper blades are laser cut and sharpened to a 23-degree angle. The fine edge of this line of UHMWPE components increases blade life and reduces vibration.

To reduce the number of UHMWPE scraper blades required for a drum filter, Xinxing produces standard 6 inch blades as well as longer lengths including 12 inch, 18 inch, 24 inch, and 48 inch ones. Longer blades and fewer joints extended the blade lives for the filter. Additionally, our longer UHMWPE scraper blades are more easily installed and aligned, which leads to a reduction in filter downtime.

Features of the UHMWPE Machined Parts
1. Highly abrasion resistant
2. Reduce conveyor noise
3. Significantly reduced damage of material

Size

Model	L	L1	T	H	h	E1	E2	D	d
BF480×90	480	90	16	90	70	170	310	44	9
BF380×90	380	90	15	90	70	155	255	44	9
BF360×45	360	75	14	45	33	102	228	19	9
BF305×55	305	70	14	55	37	95	195	22	9
BF305×50	305	90	14	50	35	115	245	15	9
BF305×45	305	75	14	45	33	102	228	19	9
BF284×45	284	75	14	45	33	102	228	19	9
BF184×45	184	75	14	45	33	102		19	9
BF145×45	145	75	14	45	33	102		19	9
BF255×49	255	70	14	49	35	105	190	16	9
BF240×49	240	72	14	49	36	95	195	17	9
BF208×49	208	70	14	49	36	90	150	17	9
BF194×49	194	70	14	49	36	90	150	15	9
BF185×50	185	90	14	50	35	115		15	9

Applications

Industries	Applications
Bulk material handling Conveyor equipment Parcel handling/distribution centers	Belt skirting Chute liners Conveying components: bearings, belt guides, chain guides, curves, guide rails, wear strips Dead plates Diverter bars Guide Rollers	Hitch plates Hopper liners Liners for gravity flow applications Roller covers Transfer plates Under belt wear strips

Technical Data of the UHMWPE Scraper Blade

Properties	Unit	Method
Density	g/cm3	527 / D 792	0.93-1
Tensile strength at yield	MPa	527 / D 638	17
Tensile strength at break	MPa	527 / D 638	40
Elongation at break	%	527 / D 638	>50
Modulus of elasticity in tension	MPa	527 / D 638	650
Modulus of elasticity in flexure	MPa	178 / D 790	800
Ball indentation hardness	MPa	2039/1	35
Impact Strength	kJ/m2	179 / D 256	No br.
Creep rupture strength after 1000 hrs. with static load	MPa
Time yield limit for 1% elongation after 1000 hrs	MPa
Coefficient of friction against hardened and ground steel p=0.05 N/mm2, v = 0.6 m/s	-		0.29
Wear conditions as above	um/km
Crystalline melting point	℃	DIN 53 736	plus 135
Glass transition temperature	℃	DIN 53 736
Heat distortion temperature Method A Method B	℃ ℃	R 75 R 75	42 ~70
Max. service temperature short term long term	℃ ℃		plus 120 plus 90
Coefficient of thermal conductivity	W/(m K)		0.41
Specific Heat	J/(g K)		1.84
Coefficient of thermal expansion	10-5/K	DIN 53 483 / D 696	20
Dielectric constant at 105 Hz		DIN 53 483	3
Dielectric loss factor at 105 Hz		DIN 53 483
Specific volume resistance	Ω cm	DIN 60093	1014
Surface resistance	Ω	DIN 60093	1012
Dielectric Strength1mm	kV/mm	ASTM 149	45
Tracking Resistance		53 480	KA3c, KB>600,KC>600
Moisture absorption: Equilibrium in standard atmosphere (plus23℃/ 50% relative humidity)	%	62	0.01
Water absorption at saturation at plus23℃	%	62	0.01
Resistance to hot water, washing soda			resistant
Flammability according to UL standard 94			HB
Resistance to weathering			Natural: not resistant Black: resistant