Diaphragm Pump Type Hot Air Soldering Rework Station, Item WEP-952D
Description
The 952D rework station adopts an air pump with small airflow rate of 24~28L/min. It is matched with a small-diameter air source; the gentle hot air is good for small IC components or other components without blowing them away.
Other than that, the air pump has enough pressure to un-choke the joint between the hot air gun and air nozzle in case the equipment is damaged by hot air blockage.
Technical Parameters| Item | 952D |
| Power | ≤700W |
| Work Environment | 0~40°C/32~104°F |
| Storage Environment | -20~80°C/-4~176°F |
| Storage Humidity | 35%~45% |
| Hot air gun | |
| Diaphragm Pump | Diaphragm pump |
| Airflow | ≤24L/min |
| Temperature Range | 100~480℃ |
| Temperature Stability | ±1°C |
| Display | LED |
| Wire Length | ≥90cm |
| Soldering iron | |
| Temperature Range | 200~480℃ |
| Temperature Stability | ±2°C |
| Tip of ground voltage | ＜2mV |
| Tip ground impedance | ＜2ohm |
| Display | LED |
| Wire Length | ≥100cm |
If you need quick after-sales support
Please don't hesitate to send an email to !
Related products
Send Message
Most Recent
More
Other Products
Videos
