Steam Turbine <small>(Turbine using Saturated Steam and Superheated Steam)</small> Manufacturer

Steam Turbine (Turbine using Saturated Steam and Superheated Steam)

Steam Turbine <small>(Turbine using Saturated Steam and Superheated Steam)</small>

: http://finegrindingmill.com/1-6-superheated-steam-jet-mill.html

The steam turbine takes in the main steam flow from its main entrance and the regulating valve, and a low pressure steam flow from several stages at the end. Thus the electricity generating capacity of the steam turbine generator will be greatly enhanced. This kind of mixed pressure turbine can be used in a wide range of industries like cement, chemical, petroleum, metallurgy, coking, waste incineration, and so on, during which the low-energy waste steam can be used.

Feature of the Steam Turbine
1. By making full use of both saturated steam and superheated steam, the turbine can use low-energy heat source, and the energy saving performance is quite outstanding.
2. A volute steam admission cylinder is adopted for this power plant equipment. It can effectively mix the extra steam with the main steam flow.
3. The steam turbine comes with an electro-hydraulic control system which is stable and accurate. The system consists of main steam flow control system and steam admission control system, maintaining the steam pressure at a normal level.

Technical Parameters of the Steam Turbine

NO.	Model	Rated/Max. Power (MW)	Inlet		Steam Admission		Exhaust Pressure (Mpa)
NO.	Model	Rated/Max. Power (MW)	Pressure (MPa)	Temperature (℃)	Pressure (MPa)	Temperature (℃)	Exhaust Pressure (Mpa)
1	BN0.85-2.5/0.6	0.85	2.5	400	0.6	159	0.007
2	BN1.5-1.6/0.15	1.5/1.2	1.6	300	0.15	150	0.0088
3	BN2.3-1.6/0.35	2.3	1.6	325	0.35	190	0.008
4	BN2.5-1.6/0.15	2.5/2	1.6	300	0.15	150	0.0095
5	BN3.6-1.6/0.15	3.6/2.8	1.6	300	0.15	150	0.009
6	BN4.5-2.46/0.15	4.5/3.6	2.46	385	0.15	150	0.008
7	BN4.5-3.43/0.12	4.5/3.6	3.43	435	0.12	124	0.006
8	BN5-1.47/0.2	5	1.47	310	0.2	150	0.008
9	BN7-1.96/0.35	7	1.96	335	0.35	200	0.007
10	BN7.5-1.6/0.15	7.5/6	1.6	300	0.15	150	0.006
11	BN7.5-3.43/0.15	7.5	3.43	435	0.15	140	0.005
12	BN8-1.2/0.4	8	1.2	250	0.4	144	0.008
13	BN10-1.25/ 0.35	10	1.25	330	0.35	150	0.0087
14	BN10-1.8/0.3	10	1.8	345	0.3	230	0.0098
15	BN10-1.9/ 0.6	10	1.9	350	0.6	160	0.01
16	BN10-2.1/0.5	10	2.1	350	0.5	240	0.0082
17	BN12-1.96/ 0.45	12	1.96	340	0.45	170	0.007
18	BN12.2-1.2/0.4	12.2	1.2	250	0.4	0.995	0.0077
19	BN15-1.5/ 0.3	15	1.5	340	0.3	134	0.0069
20	BN15-2.29/ 0.2	15	2.29	370	0.2	150	0.0066
21	BN15-2.3/ 0.49	15	2.3	365	0.49	224	0.011
22	BN15.5-3.43/0.6	15.5	3.43	435	0.6	159	0.0051
23	BN16-3.43/0.343	16	3.43	435	0.343	136	0.007
24	BN18-1.25/ 0.35	18	1.25	330	0.35	150	0.0061
25	BN18-3.43/ 0.45	18	3.43	435	0.45	207	0.0052
26	BN21-3.2/ 0.8	21	3.2	450	0.8	315	0.0058
27	BN24-4.9/ 1	24	4.9	470	1	180	0.006
28	BN25-3.43/ 0.35	25	3.43	435	0.35	200	0.0053

Note: These models are only for reference. Custom mixed pressure turbines are also available according to your requirements.