Sand and Dust Environmental Test Chamber
Sand and dust blown using the chamber's blower goes through product sample surfaces in order to test the product resistance to dusty, desert like environments.
Parameter:Dimensions | |
Nominal volume | 1m³ |
Interior | W1000×D1000×H1000 mm |
Exterior | W1450×H1900×D1100 mm |
Capability | |
Environment | Temperature:+25℃ Relative humidity:≤85% Atmospheric pressure:86~106kpa |
Temperature range | Normal |
Humidity range | < 65%R.H |
Dust concentration | 2~4kg/m3 |
Wind speed | 2-10M/S |
Blowing time | 1s~99h adjustment |
Vibration time | 1s~99h adjustment |
Dust | Dry talc power through a square sieve whose sieve hole diameter is 75µm and wire diameter is 50µm Dust concentration:2-4Kg/m3 |
Noise | ≤75dB(A) |
- Internal structure
- Internal chamber
- Dust inlet
- Pressure gauge
- The high quality silicone rubber seal strip features an excellent tightness, as well as an outstanding aging and high temperature resistance, thus preventing any leaks.
- Dust will fall and gather at the tapered bottom of the internal chamber equipped with a vibrator. Operators can then remove dust and sand from the dust outlet.
- Customers can install remote control software on a computer in order to allow the operator to remotely control the equipment.
Related products
Send Message
Most Recent
More
Other Products
Videos