NEW DODO-500H Automatic Canbody Welder
The automatic canbody welder is designed to carry out the rounding and welding processes used in the production of three-piece metal can bodies. The production output of this welder is 200 cans/min to 400 cans/min depending on the height of the can.
Features
- The electronic control system of the automatic canbody welder consists of an easy to use interface, PLC system, and servo system.
- Its static variable frequency power source provides stability and energy savings.
- Special rounding device features excellent rounding and anti-scratching abilities. This device can process various types of tinplate.
- The key parts of this automatic canbody welder are made of wear-resistant ceramics and high quality alloy steel.
- Remote control system and a weld seam detection system are optional.
Technical Specifications
| Welding speed | 70m/min（max） |
| Production output | H133mm: 400cans/min（Max） |
| H180mm: 300cans/min（Max） | |
| H240mm: 250cans/min（Max） | |
| H300mm: 200cans/min（Max） | |
| Can inner diameter range | Φ52～Φ75mm |
| Height range | 100～320mm |
| Welding points distance | 0.5～0.9mm |
| Overlap width | 0.25～0.5mm |
| Sheet thickness | 0.16～0.30mm |
| Temper | T2.5～DR8 |
| Wire diameter | Φ1.24～1.38mm |
| Electrical mains | Three phase Voltage: 380V |
| Frequency: 50Hz | |
| Power consumption: 45kw | |
| Welding frequency | 250-850Hz |
| Cooling water | >0.4MPa, 12-18℃, 50L/min |
| Air pressure&consumption | >800L/min, >0.6MPa |
Related products
Send Message
Most Recent
More
Other Products
Videos
