Fast Vulcanizing Silicone Rubber

Fast Vulcanizing Silicone Rubber
Applications

Fast vulcanizing silicone rubber is primarily suitable for the production of rubber protective covers, wallets, watch bands and other rubber products with less demanding on transparency.

Features
  • Rapid vulcanization;
  • High resilience;
  • Good processability;
  • Easy de-molding;
Approvals

ROHS, REACH, FDA, CA65, EN71-3, EN14372, PAHS, PFOA, CPSIA, etc.

Test

50% DBPMH (2,5-Dimethyl-2,5-di-(tert-butylperoxy) hexane), addition 1.5%, 175℃×5min×15Mpa

Technical Data
  • Model: HT-8130Z
  • Appearance: Translucent
  • Processability: 200-200
  • Hardness (Shore A): 30
  • Density (g/cm3): 1.12
  • Tensile strength (Mpa): 5
  • Elongation (%): 700
  • Tear strength (K N/m): 8
  • Model: HT-8140Z
  • Appearance: Translucent
  • Processability: 220-240
  • Hardness (Shore A): 40
  • Density (g/cm3): 1.13
  • Tensile strength (Mpa): 7
  • Elongation (%): 600
  • Tear strength (K N/m): 40
  • Model: HT-8150Z
  • Appearance: Translucent
  • Processability: 220-240
  • Hardness (Shore A): 50
  • Density (g/cm3): 1.14
  • Tensile strength (Mpa): 8
  • Elongation (%): 300
  • Tear strength (K N/m): 50
  • Model: HT8160Z
  • Appearance: Translucent
  • Processability: 230-260
  • Hardness (Shore A): 60
  • Density (g/cm3): 1.15
  • Tensile strength (Mpa): 8
  • Elongation (%): 400
  • Tear strength (K N/m): 50
  • Model: HT-8170Z
  • Appearance: Translucent
  • Processability: 260-280
  • Hardness (Shore A): 70
  • Density (g/cm3): 1.2
  • Tensile strength (Mpa): 9
  • Elongation (%): 450
  • Tear strength (K N/m): 50
  • Model: HT-8180Z
  • Appearance: Translucent
  • Processability: 250-280
  • Hardness (Shore A): 80
  • Density (g/cm3): 1.2
  • Tensile strength (Mpa): 8
  • Elongation (%): 300
  • Tear strength (K N/m): 40
Related products
Send Message