YZXQ-1A Hot Mounting Press, Hydraulic Type Manufacturer

YZXQ-1A Hot Mounting Press, Hydraulic Type

: http://metallographictesting.com/2-1-hot-mounting-press.html

Metallographic Compression Mounting Press

YZXQ-1A hot mounting press is an advanced, automatic, hydraulic water-cooled equipment. The sample mounting process is automatically controlled by single chip, coming with one-button operation of heating, pressure loading, holding, cooling, unloading. This requires no operators on duty. Besides, the metallographic compression mounting press features sound and light alarm functions.

Request a quote

Features

This metallographic compression mounting press adopts hydraulic pump for higher pressure, making the mounted sample more compact.
The cavity is lengthened to allow the operation of mounting two samples at one time by using the middle block.
Unique heat and cold separation design makes the operation safer and more stable.
Dual control comes with high resolution touch screen and physical start button. YZXQ-1A mounting press can store operator-created mounting programs, easy to access.
Water cooling system is equipped for fast mounting. It takes only 6 minutes to complete a task of mounting two samples at one time, making the sample preparation easier and more labor-saving. This also enables the mounting quality better and more stable.

Hot Mounting Examples

Specifications

Mounting mould size: Ф25mm, Ф30mm, Ф40mm (choose one)

Cavity height: 140mm, effective height is 85mm, can make two samples at one time

Heating power: Ф25mm/Ф30mm: 1.8kW; Ф40mm: 2.4kW

Pressure: 50~200bar (The default is 150bar, equivalent to 15Mpa or 150kgf/cm²)

Heating temperature: 50~180℃

Heat time: 0~5 min

Hold time: 30s~60min

Cooling time: 0~8min

Total time: 6min 30s for Ф30mm

Cooling method: external water source

Dimensions: 530×510×480mm (Top closure opening height: 85mm)

Net weight: 60kg