MIG/MMA Welder / Inverter Welding Machine
MIG 251GE
Features
- Equipped with RILAND’s self-developed RICHI chip and use the advanced IGBT inverter technology;
- Available to 5kg flux-cored self-shield wire, actually welding without gas and add hand welding function;
- Synergy, greatly reduce difficult to adjustment, especially for new welding operator;
- Stable welding performance on small current around 40A, enhancing the capacity to weld thinner metal and 0.8mm sheet, spot welded without perforation;
- Lower spatter than that of general flux-cored welding machine;
- Wire inching function act as you press the trigger about 3s under no load;
- Fan as needed, reduce noise and dust inside the machine;
- Intelligent protection: over-current, over-voltage, over heating protection;
Specifications
| Model | |
| Power supply(V) | 1 phases 230V±15% |
| Frequency(Hz) | 50/60 |
| No-load voltage(V) | 61 |
| Rated input current(A) | 27 (MIG) |
| 27.2 (MMA) | |
| Output current range (A) | 50 - 160 (MIG) |
| 40 - 140 (MMA) | |
| Output voltage range (V) | 16.5 - 22 (MIG) |
| 21.6 - 25.6 (MMA) | |
| Duty cycle | 20% |
| Power factor | ≥0.65 |
| Efficiency (%) | ≥80% |
| Type of the wire feeder | Internal |
| Welding-wire diameter (mm) | 0.8/1.0 |
| Insulation class | F |
| Protection grade | IP21 |
| Weight without wire roller (kg) | 6 |
| Dimension(L*W*H mm) | 418*178*270 |
Package Included
- MIG welding torch, 1pc
- Welding cable quick connector, 2pcs
- Ground clamp & cable assembly, 1 set
- Allen key, 1pc
Applications
Optional Welding Accessories
Ground clamp & cable assembly
E71T-GS self-shielded flux-cored wire (Ø0.8mm)
ER50-6 MIG solid welding wire
Electrode holder & cable assembly
Welding chipping hammer
Welding gloves
Welding safety goggles
Hand-held welding shield
Related products
Send Message
Most Recent
More
Other Products
Videos
