200-400KG Electric Windlass

200-400KG Electric Windlass
Model
  • KDJ-200F
  • KDJ-250F
  • KDJ-300F
  • KDJ-300F1
  • KDJ-400F1
Features
  • Transmission structure
    The hoist drum is connected to gearbox through two-stage geared coupling, allowing wire ropes to be easily adjusted and replaced.
  • Wire rope tightening
    Put a P.T. screw into the hole of the drum to tighten the wire rope, it can efficiently prevent the wire rope from falling off.
  • Heavy duty brake
    Electromagnetic brake with wear resistant brake disc is adopted, and it features a simple structure without adjusting brake air gap. The brake can be automatically and immediately activated during power failure to efficiently control the lowering of heavy loads, ensuring operation safety.
  • Motor
    The winch can be equipped with three-phase asynchronous motor or single-phase capacitor-run motor to ensure large starting torque, low temperature rise and prolonged service life. All motors are with class B insulation.
  • Gear
    The gears are made of high grade steel which is hardened by heat treatment and precisely processed, featuring good wear resistance, low noise, high efficiency and excellent mechanical performance.
  • Control system
    The handle is designed with low voltage control and protection rating of IP65, guaranteeing a reliable safety.
Technical Data
Model Rated capacity (kg) Rated speed (m/min) Lifting height (m) Wire rope diameter (mm) Wire rope length (m) Work level Motor (kw) Voltage (v) Frequency (Hz) Net weight (kg)
KDJ-200F 200 10-15/12-18 38 Φ6 40 M3 0.75×4 AC100/110/ 120/220/ 230/240 50/60 40
KDJ-250F 250 44
KDJ-300F 300 1.1×4 53
KDJ-300F1 300 10-15 Three phase 230/380/415/ 440/480 52
KDJ-400F1 400 12-18 1.5×4 55
Related products
Send Message