RemarkStandard Functions01 Protection of phase dislocation and phase loss3EWhen phase dislocation or phase loss of input power supply occurs, the main circuit and control circuit will be cut off, in order to automatically stop the escalator.02 Non-operation reversal protectionARPIf reverse movement occurs by accident during operation, the device will cut off the power supply of driving unit and brake.03 Additional brakeAUX-BKThe additional brake system will stop the escalator before that the operating speed is 1.4 times higher than the rated speed, or when the running direction changes.When lifting height exceeds 6000mm04 Operating brakeMUSTACHEThe driving device is equipped with an operating brake. When the operating brake works, the escalator will stop.05 Safety device of comb plateCSSIf something gets stuck between comb plate and the pedal, the device will cut off the power supply of the driving unit and the brake.06 Safety device of drive chainDCSIf the drive train breaks or elongates abnormally, the device will cut off the power supply of driving unit and brake.07 Emergency stop buttonE-STOPWhen an emergency occurs, press the emergency stop button to cut off the power supply of driving unit and brake.08 Speed limiting device for low speedGOVIf the speed is lower than rated speed by 20%, the device will cut off the power supply of motor and brake.09 Handrail inlet coverHGBThe long, flexible rubber cover covers at the handrail inlet, to avoid pinching or other accidents.10 Speed limiting device 1HGD1The device will cut off the power supply of driving unit and brake when the operating speed reaches 1.2 times of the rated speed.11 Speed limiting device 2HGD2In the operating speed exceeds the rated speed of 1.4 times before, the device operation, and cut off the additional brake power.When the lifting height exceeds 6000mm12 handrail entry safety deviceHGSIf a foreign object into the handrail at the entrance card, the device will shut down the drive and the host of the brake power.13 step chain safety deviceSCSIf the rung-strand breaks or abnormal elongation, the device will cut off the host drive and brake power.14 Cascade subsidence safety deviceSRSIf any part of the rung subsidence damage can not be properly engaged with the upper or lower comb plate, the device will cut off the host drive and brake power.Optional Functions15 signal interface meansBAThis output means escalator basic operational status signal.When the Model KS-LB, KS-SB, KS-B can only choose one time16 Elevator Monitoring SystemSMOS-IIThe system uses state of the computer operation and fault monitoring of the escalator or walkway17 skirting safety deviceSSSWhen a foreign body is sandwiched between steps and skirting, the device will shut down the drive and the host of the brake power.

Basic Specific

Note: For model KS-SB/KS-SBF, the handrail nominal width of 800mmis not available.

Power Supply Data

Power Supply for Running (3 Phases)

Power Supply for Lighting (Single Phase)