30V 5A Hot Air Soldering Rework Station with DC Power Supply, Item WEP-853D Manufacturer

30V 5A Hot Air Soldering Rework Station with DC Power Supply, Item WEP-853D

: http://yihua-soldering.com/2-3-wep-853d-hot-air-soldering-station.html

Description
The WEP-853D hot air soldering station is designed to carry out various treatments, including heat shrinkage, drying, pain removal, thawing, debonding, reheating, and rubber welding on different electronic components. It is integrated with a 30V/5A DC current, hot air gun and soldering iron. The control panel features an aluminum panel and the DC current display can be switched between mA/A.

Technical Parameters

Parameters
Rated voltage		AC 220V±10% 50Hz
power		≤1000W
300℃The thermostat power of (high-speed PID programmable energy saving)		250W±10％
Working environment		0～40℃ relative humidity＜80％
Storage environment		－20～80℃ relative humidity＜80％
Body size		255188125mm
Weight		7.26KG

Parts parameters	Hot air gun	Soldering iron
Work voltage	AC 220V±10% 50Hz	AC 26V±10% 50Hz
Output power	720W	75W
Temperature range	100℃～480℃	200℃～480℃
Airflow type	Brushless fan	---
Air Flow	120L/min(MAX)	---
Temperature Stability	±1℃ (Static)	±1℃ (Static)
Display Type	Red LED display	red LED display
Temperature correction type	The PID digital program proofreading	The PID digital program proofreading
PID Temperature correction cycle	rapidly 20ms	high-speed 100ms
Heating elements	Ceramic skeleton heater	Imported heater
Standard nozzles/tips	(10mm,8mm,5mm,13mm) 4 PCS nozzles	B
Tip ground impedance	---	＜2Ω
Tip of ground voltage	---	＜2mV

DC power supply
Output voltage		0~30V
Output current		0-5A adjustable
Protection type		Short-circuit over-current
Voltage/ Current display type		red LED display
Load stability		< 0.01±2mv
Ripple dB		< 1mvrms (virtual value)

Features

PID controller used for the real-time tracking of the air gun temperature and soldering iron temperature with high-speed 100ms cycle, and auto corrects the temperature with high stability.
High precision DC power supply: Output voltage: Adjustable between 0-30V DC, Output Current: Adjustable between 0-5A. The power supply is protected from overloading with high precision and reliability.
The power port comes with a voltmeter instead of using exterior precision digital voltmeter.
Handle protection function, the air gun and soldering iron handles have to be placed on the holder when powering on the rework station to begin normal functioning. The main reason is for safety if the handles are misplaced in dangerous locations.

If you need quick after-sales support

Please don't hesitate to send an email to !