Hammer Mill (for Wood)

Hammer Mill <small>(for Wood)</small>
Hammer Mill <small>(for Wood)</small>
Request a Quote

    Applications
    The hammer mill works as a wood crushing machine for coarse, fibrous materials and large block materials, including tree branches, bark, and wood blocks. In addition to wood materials, this crushing equipment can be used to crush plant tubes, domestic waste and chemical waste. The multi-functional crusher can crush fibrous, crisp and high water content materials.

    Features
    1. The hammer mill for wood is welded from steel plates, and uses a belt transmission.
    2. The electric motor and the rotor are mounted on the same base.
    3. The rotor on the wood chip hammer mill has passed a dynamic balance test.
    4. Our wood crusher is equipped with symmetrically arranged hammer plates.
    5. The feed inlet is set at the top of the wood hammer mill, and can be paired with auger feeding mechanisms or belt feeding mechanisms.
    6. This wood chip processing equipment has a simple structure, and is easy to install, operate and maintain. It has a high production capacity, and consumes very little energy.

    Technical Parameters Hammer Mill
    Model and specification SFSPMX80×45 SFSPMX80×60 SFSPMX80×80 SSFSPMX80×100
    Rotor diameter (mm) 800 800 800 800
    Grinding chamber width (mm) 450 600 800 1000
    Rotating peed of main shaft (r/min) 1841 1841 1841 1841
    Linear speed of hammer plates (m/s) 77 77 77 77
    Hammer plate quantity (pcs.) 36 48 72 96
    Power (kW) 18.5/22 30/37 45/55 75/90
    Bearing model 2216 2216 2317 2317
    General-purpose anti-vibration pad 6 6 6 6
    Screen size 445×1250 595×1250 795×1250 995×1250
    Overall dimension Length (mm) 1860 1860 1860 1860
    Width (mm) 750 900 1180 1380
    Height (mm) 1500 1500 1500 1500
    Normal air volume (m3/min) 74 91 110 141
    Performance Indexes of Hammer Mill (Under Normal Conditions)
    Model and specification SFSPMX80×45 SFSPMX80×60 SFSPMX80×80 SSFSPMX80×100
    Power (kW) 18.5 22 30 37 45 55 75 90
    Production capacity (>, t/h) 1.5 2 3 3.5 4.5 6 8 10

    **NOTE: The above indexes are tested under the following conditions:
    1. The material has a water content no higher than 14%.
    2. The material capacity is no lower than 0.3t/m³.
    3. The screen mesh diameter is 8mm, and the percentage of the screening plate opening is no lower than 33%.

    Related products
    Send Message
    Inquiry
    Inquiry