CNC Rebar Bending Machine, GW40/50NC
This product has been discontinued and removed from our shelves.
The GW40/50NC rebar bending machine is able to bend rebar into any desired shape, has been widely used in small, medium and large-scaled working sites such as bridge construction, tunnel construction and etc. This rebar bender is capable of maximum 10 bends with different angles each single feeding, and all pre-programmed bending angles are automatically switched over.
Advantages
Technical Parameters- Flexible angle adjustment of 1-350°with tolerance within±0.5°.
- Simple operation using a foot pedal.
- The spring restoration after each bending has a tolerance within 0.5°.
- Holding pins in special hardened and cemented steel, hardness reaches 50-55 HRC and more than 180 days service life.
| Model | GW40NC | GW50NC |
| Voltage | 3-380V 50Hz | 3-380V 50Hz |
| Motor Power | 3.0 kw | 4.0 kw |
| Motor Speed | 1440r/min | 1440r/min |
| Rebar Bending Diameter Scope | Common Carbon Steel≦40mm Grade III Deformed Bar≦32mm | Common Carbon Steel≦50mm Grade III Deformed Bar≦40mm |
| Working Plate Diameter | 350mm | 400mm |
| Spindle Speed | 7r(14r)/min | 7r(14r)/min |
| Weight | 350kg±5kg | 380kg±5kg |
| Dimension | 930*730*730mm | 1040*750*730mm |
Related products
Send Message
Most Recent
More
Other Products
Videos
