JND series of automatic bottle making machine is widely used to produce varieties of PET plastic container and package. This PET bottle making machine widely use in beverage industry, such as mineral water, pure water, juice, soda water, carbonated drinks, hot filling drinks, oil, cosmetic and hot infusion, etc. Controlled by micro-computer with each main process fitted with safety of self-locking, it is operated by only one worker and the total production is completed automatically. Its wide utilization and reliable performance make it become popular and attractive to all bottle manufacturers. It's strongest point is energy savings.
Adopting high pressure clamping, JND automatic stretch bottle making machine makes self-adjustment in accordance with the different pressure needed during production, thus ensures the super clamping force. While the high pressure sealing system with automatic adjustment permits that mold sealing is under condition of 100% air tightness before blowing and avoid air energy loss owing to incomplete air tightness. With such effective control over air energy and power, it takes a big part to lower costs and improve efficiency.
Technical Parameters: | General Information | JND-E2500 |
| Clamping Force | 150KN |
| Clamping Stroke | 130MM |
| Max. Stretching Stroke | 370MM |
| Bottom Moving Stroke | 70MM |
| Number of Cavities | 2 Cavity |
| Theoretical Output | 2000 BPH |
| Electrical System |
| Voltage Standard | 380v/3PH/50Hz or special order |
| Total Power (Full Loaded) | 15KW |
| Container |
| Max. Container Volume | 2L |
| Neck Diameter Range | 16-38mm |
| Max. Container Diameter | 100mm |
| Max. Container Height | 360mm |
| Air system |
| Low Air compressor | 8-10Bar |
| High Air compressor | 30-40Bar |
| Dimension & Weight |
| Blow molding machine | 2.3*1.4*2.7m |
| Preform Autoloader | 1.3*0.85*2.4m |
| Net Weight | 4T |
| General Information | JND-E4000 |
| Clamping Force | 370KN |
| Clamping Stroke | 130MM |
| Max. Stretching Stroke | 370MM |
| Bottom Moving Stroke | 70MM |
| Number of Cavities | 4 Cavity |
| Theoretical Output | 3500 BPH |
| Electrical System |
| Voltage Standard | 380v/3PH/50Hz or special order |
| Total Power (Full Loaded) | 25KW |
| Container |
| Max. Container Volume | 2L |
| Neck Diameter Range | 16-38mm |
| Max. Container Diameter | 100mm |
| Max. Container Height | 360mm |
| Air system |
| Low Air compressor | 8-10Bar |
| High Air compressor | 30-40Bar |
| Dimension & Weight |
| Blow molding machine | 3.6*1.63*2.7m |
| Preform Autoloader | 1.5*0.98*2.45m |
| Net Weight | 4T |
| General Information | JND-E5500 |
| Clamping Force | 565KN |
| Clamping Stroke | 130MM |
| Max. Stretching Stroke | 370MM |
| Bottom Moving Stroke | 70MM |
| Number of Cavities | 6 Cavity |
| Theoretical Output | 4300 BPH |
| Electrical System |
| Voltage Standard | 380v/3PH/50Hz or special order |
| Total Power (Full Loaded) | 30KW |
| Container |
| Max. Container Volume | 2L |
| Neck Diameter Range | 16-38mm |
| Max. Container Diameter | 100mm |
| Max. Container Height | 360mm |
| Air system |
| Low Air compressor | 8-10Bar |
| High Air compressor | 30-40Bar |
| Dimension & Weight |
| Blow molding machine | 5.0*1.83*2.7m |
| Preform Autoloader | 1.5*0.98*2.45m |
| Net Weight | 4T |
