FY Series Hydraulic Clamp System Manufacturer

FY Series Hydraulic Clamp System

: http://moldpresscn.com/3-3-fy-series-hydraulic-clamp-system.html

Recommended Application
The FY series hydraulic clamp system is primarily used for clamping molds with a T-slot clamp, thus reducing the time needed to change molds. Compared to other hydraulic clamp systems, work support is its most attractive feature, as it saves a significant amount of installation space.

The FY series hydraulic clamp systems are more often used for stamping molds, with matched equipment including a stamping machine, oil hydraulic machine, and more.

Technical parameter

Optional type

Type	Clamping force(25MP)	Whole stroke	Clamping stroke	Reserved secure stroke	Hydraulic clamping cylinder volume	Weight
Type	KN	mm	mm	mm	cm3	kg
FY2	20	8	4	4	6.5	2
FY4	40	8	3	5	15	4
FY6	60	8	3	5	22	6
FY10	100	8	5	5	33	8
FY16	160	8	5	5	55	10
FY25	250	8	5	5	85	18

Type selection
Users can choose the corresponding clamp type and number according to your equipment needs.

Type of the hydraulic clamping system			a(H7)	b	c	d
FW2	FW2-S	FY2	18	30⁺²0	14⁺¹0	19±0.2
FW4	FW4-S	FY4	22	36⁺²0	16⁺¹0	25±0.2
FW6	FW6-S	FY6	22	36⁺²0	16⁺¹0	25±0.2
FW10	FW10-S	FY10	22	36⁺²0	16⁺¹0	25±0.2
FW16	FW16-S	FY16	28	46⁺²0	20⁺²0	32±0.2
FW25	FW25-S	FY25	36	60⁺²0	30⁺²0	41±0.2
FW50	FW50-S	/	42	68⁺²0	30⁺²0	47±0.2

Dimensions

Specification	M	N	Rc	L	J	K	H(Standard)
FW2	50	55	1/8	12	18	38	25
FW4	76	65	1/4	15	25	55	30
FW6	80	70	1/4	15	30	64	30
FW10	100	75	1/4	15	40	78	40
FW16	130	80	1/4	15	50	88	50
FW25	150	105	1/4	15	60	98	50

Note: H is the thickness of mold base plates that are matched with standard hydraulic clamps. Customization is available upon user request.