Drive Through Bus Wash System (5-Brush)
The drive through bus wash system with 5 brushes (CB-750) features a PLC fully-automatic computer system to improve the security and high pressure water system, which increases the washing speed. The bus system washes both buses and trucks using 4 lateral brushes and 1 overhead brush. Further details are shown in the table below.
Parameters
| Model | CB-750 |
| Dimension | L*W*H: 7210mm×5400mm×5500mm |
| Assembling Range | L*W: 8000×6000mm |
| Air pressure | 0.75~0.9MPa（7.5~9kg/cm²） |
| Voltage | AC three-phase four-wire system Voltage AC380V50Hz |
| Water supply | DN25mm water flow rate≥120L/min |
| Ground flatness | Deviation≤10mm |
| Washing method | Drive through |
| Applicable Vehicles | Container truck, box truck, bus |
| Applicable Car Dimension | L (no limit) W≤3000mm H=3250mm |
| L (no limit) W≤3000mm H=4400mm | |
| Washing Time | 15-30 cars/h |
| Water consumption | 180-240L/car |
Advantages
- The fully automatic PLC electronic control system improves the security.
- A high pressure water system increases the washing speed.
- The galvanized frame is extremely corrosion resistant.
- A built in self-diagnosing system automatically detects and removes mechanical obstacles during the washing process.
Configurations
| Standard Devices |
| Lateral brush motor |
| Overhead brush motor |
| Water pump |
| Drive motor |
| Equipment data intellectualization |
| Self-diagnose system |
Related products
Send Message
Most Recent
More
Other Products
Videos
