Ceramic Eyelet Wire Guide Manufacturer

Ceramic Eyelet Wire Guide

: http://wire-tensioning.com/4-1-ceramic-eyelet-wire-guide.html

Application
The coil winding machine ceramic eyelet is a frequently used as a wire guide in a variety of winding machinery and textile machinery.

Features
(1) When the enameled wire moves through the surface of the ceramic eyelet inside the coil winding machine, it requires a relatively small friction force, allowing the wire passage to be smoother. Because of that, we carry out ultra-fine polishing on the ceramic eyelet, with a polishing accuracy of up to Ra 0.2, thus significantly reducing the risk of damage to the enameled wire.
(2) As a wire guiding component, the ceramic will eventually become worn through the friction with the enameled wire. In order to improve the service life, we use AL2O3 as the material, with a purity of 99%, a density of 3.85g/cm2, and a hardness of more than HRC88, thus improving the wear resistance.

Specification introduction

Specification	Total length L	Minor diameter L1	Major diameter D	Minor diameter D1	Hole diameter of the wire outlet d1	Hole diameter of the wire inlet d2
W0202-2005-1505	15	5	2	0.5	0.2	0.2
W0202-2000-3300	33	*	2	*	0.2	0.2
W0202-3010-3015	30	15	3	1	0.2	0.2
W0202-3006-3010	30	10	3	0.6	0.2	0.2
W0202-3015-3015	30	15	3	1.5	0.2	0.2
W0202-3007-3508	35	8	3	0.7	0.2	0.2
W0303-3008-3012P	30	12	3	0.8	0.3	0.3
W0303-3012-3519	35	19	3	1.2	0.3	0.3
W0303-3008-4506	46	6	3	0.8	0.3	0.3
W0303-3020-3515	35	15	3	2	0.3	0.3
W0303-0800-3500	35	*	0.8	*	0.3	0.3
W0303-3018-4018	40	18	3	1.8	0.3	0.3
W0404-3010-3009	30	9	3	1	0.4	0.4
W0404-3007-4528	45	28	3	0.7	0.4	0.4
W0505-3012-4506T	45	6	3	1.2	0.5	0.5
W0606-3012-3520	35	20	3	1.2	0.6	0.6
W0606-3016-4010T	40	10	3	1.6	0.6	0.6
W0808-3018-3518	35	18	3	1.8	0.8	0.8
W0808-3018-3010	30	10	3	1.8	0.8	0.8
W1212-3022-3010	30	10	3	2.2	1.2	1.2