More-173 17.3 Inch Carry-On Monitor, LCD Monitor
1. More-173 17.3 inch carry-on monitor, LCD monitor is widely used for matching UAV, teleoperator, remote gyroscopic platform, remote control shooting car and related equipment sets.
2. The military grade engineering box imported from Italy has been formed by PPS high strength material once. It has the characteristics of dust-proof, waterproof, high temperature resistance, impact resistance, corrosion resistance and so on. It can be used in a variety of field shooting environment.3. The quality of the product is strictly controlled. We carry out 150cm dropping test, 12 hours high temperature aging test, 72 hours normal temperature running test to ensure that the More-173 monitor can be applied and transported in various environment.
4. Just lift the upper cover of the box which the LCD unit is built in, the hydraulic struts on both side support the case opened slowly, and they will stop automatically when the struts extend to the designed angle.5. More-173 adopts split patented technology so there is only LCD screen unit on the top cover, thus, the weight of the top cover is reduced to ensure that the monitor will not lean backwards when the cover is open. This will not be realized by the one piece monitor.
6. By adopting this monitor, the redundant operating procedure and time can be saved. The monitor can be opened or closed within one minute.| Size | 17.3 inch |
| Resolution | 1920×RGB×1080 |
| Dot pitch | 0.199 (H) ×0.199 (V) mm |
| Aspect ratio | 16:9 / 4:3 switchable |
| Back light | RGB LED |
| Brightness (max) | 300cd/m² |
| Contrast (max) | 800:1 |
| Color depth | 10Bits (1.073G color) |
| Image processing | 10Bits |
| Response time | 10ms |
| Viewing angle | H 178° / V 178° |
| CVBS | BNC×1 |
| 3G-SDI | BNC×2 |
| VGA | D-SUB15×1 |
| HDMI | HDMI×1 |
| CVBS | BNC×1 |
| 3G-SDI | BNC×1 |
| Analogue audio input | RCA×1 (double channels) |
| Audio demultiplexing | Support |
| Audio meter | 16 channels (Maximum 8 channels can be displayed at one time) |
| Speaker | 2×8Ω/2W |
| Headset | Support |
| CVBS | NTSC, PAL |
| VGA | VGA(640*480), SVGA (800*600) , XGA (1024*768) , WXGA (1280*768/1280*800) , SXGA (1280*1024) , SXGA+ (1440*1050) , WSXGA (1680*1050) , UXGA (1600*1200) , WUXGA (1920*1200) |
| HDMI | 480p/60, 480i/60, 576i/50, 576p/50, 720p(50/60), 1080i(/50/60), 1080p(24/25/30/50/60) |
| 3G-SDI | 1080p50/60 |
| HD-SDI | 1080i/60/59.94/50, 1080p/30/29.97/25/24/24sF/23.98/23.98sF, 720p/60/59.94/50 |
| SD-SDI | 480/59.94i, 576/50i |
| Input voltage | DC 12V standard 4 pin XLR |
| Power consumption (MAX) | ≤25W |
| Working temperature | 0-40℃ |
| Store temperature | -20-60℃ |
| Store humidity | 0%-90% No condensation |
| Shell material | PPS special engineering plastics+Aluminum magnesium alloy |
| Dimension (mm) | L474XH149XD415mm |
| Weight | 12KG (do not contain sun hood) |
| Installation | Built-in carry on case |
More-173 17.3 inch carry-on monitor, LCD monitor has the following functions:
Function setting button, 3D LUT loading, luminance waveform, RGB waveform, vector, audio meter, time code, focus assistance, ELP (GPS in video), false color, safety marker, marker scale, blue only, mono, aspect ratio, over scan, pixel-to-pixel (PTP), GAMMA, H/V DELAY, battery indicator, mute, safety lock
1. Remote antenna
2. Carry on buckle
3. Hydraulic strut
4. 12V power output
5. HDMI split screen input
6. HDMI input/HDMI-to-SDI function port
7. Anti-slip handle
8. Sealing and reducing valve
9. Remote panel
10. USB port
11. Total power source
12. PC power source
13. Audio output
14. Keyboard
15. Remote antenna port
16. Sun hood quick disassemble switch
17. Displays adjusting panel
18. Audio input
19. CVBS output
20. CVBS input
21. HD/SD-SDI input/HDMI-to-SDI output port
22. HD/SD-SDI input
23. PC switch
24. DC 12V power input
25. Function panel opening key
26. Speaker
27. Display screen
28. Sun hood buckle
The More-173 monitor adopts two kinds of luminance waveform of IRE and voltage luminance waveform. The basic function of these two measuring methods is that they can monitoring the range of luminance change of the video signal at real time.
- IRE luminance waveform
- Voltage luminance voltage
RGB waveform is used to see if there is deviation of the color distribution at the shooting scene. Or it can realize related arrangement according to the shooting title. It is also helpful for white balance adjustment. The RGB waveform has same nature with the luminance waveform which is representing luminance of single channel via red, green and blue channels.
The chroma vector waveform can be the reference for the hue and saturation, especially for the adjustment of saturation. For cameraman, one method for direct saturation increasing is reducing the entering quantity of the white light.
16 channels of digital audio signal can be embedded in the SDI audio signal. Normally, just displaying 8 channels can satisfy basic requirements. The Volume unit SDI (VU&PPM) is used for measuring audio levels and calibration. This is helpful for making sure that audio levels are within technical requirements and specifications. The data can be defined by customers according to requirements. It can be displayed vertically or horizontally.
① Warning area ② Early-warning area ③ Safety area ④ Indicator mark ⑤ Channel value
For this function, the color of edge line can be selected according to the shooting environment and target, including red, blue, green, yellow and white. It is used to identify the edge line and the chromatic aberration of the shooting target, thus realizing quick and accurate focus.
The better the focus effect is, the more dense the edge lines are. The red edge focus function of the Ruige monitor features optional color as well as optional coloring width which can be divided into three types: thin, medium and thick.
- Original image
- Peaking focus
Usage: this function can be used for evaluation of exposure. False color can show the level of brightness (Y). It is a method enhancing image display. Warm color indicates higher exposure and cool color indicates low exposure. The color change from warm color to cool color is red, yellow, green, blue. So the image with higher brightness shows dark red while image with lower brightness shows dark blue. So false color is a direct method which has the similar function of luminance waveform, showing the luminance distribution of the image.
- Original image
- False color
The safety marker of Ruige can avoid image cutoffs caused by over scan during video play. The display safety issue is caused by over scan during video signal display on the video receiving and re-playing device.
Because of the limit of monitor size and effective pixels, not all the monitors can show fully HD signal. So Ruige monitors use RPD technology (pixel to pixel function) to magnify image parts by parts to realize reappearing of 1080 original pixels.
Usage: This function can be used for the monitor with the resolution less than 1080. To view details, this function can avoid the loss of image detail due to lack of screen performance.
Beyond the normal image, the blanking area of field/horizontal signal is shown on screen.
In SDI signal, there is much useful information which is embedded in the blanking area of field/horizontal signal such as SDI Audio, CC (Closed Caption), etc.. It is necessary to check the information in the blanking area to make sure if these information has been embedded successfully.
- Before H/V delay
- On H/V delay
When use battery to supply power to monitors, please enter the menu to 'Auxiliary Function' and open 'Battery Checker'. You will find one Battery meter displayed at the top-right corner of the monitor, calculating the remaining of battery capacity. When capacity is less than 30%, the scale meter color will be changed from Green to Red.
In order to shut down the embedded audio of the HD recorder during shooting or to avoid audio crosstalk when using several monitors at the same time, the panel is equipped with mute function, avoiding issue of adjusting audio.
More-173 is a new type portable zipper bag, adopting nylon material and featuring anti-abrasive, anti-impact, pressure resistant.
The sun hood is made of metal frame and Oxford Fabric. The bayonet up and down can realize one shot disassemble. So it is safe and convenient.
DC-12V AC adapter (4pins XLR)
Input voltage: 100-240V ~1.0A 50/60HZ; output voltage: DC-12V 4.0A; certification: CE/FCC/3C/UL/ROHS etc.
AC power cord
specification: IEC 60320 C7; wire core: full copper 10AX3X0.75m2; external material: fire proof PVC plastics; internal plug-in: H59#copper H62#copper nickel plated.
Related
video equipment, portable monitor, LED backlit LCD monitor
