Glow-in-the-dark Tape
Self-adhesive glow-in-the-dark tape consists of four layers: protective film layer, light-emitting layer, adhesive layer and liner. This product can be applied to any flat surface where there is no grease to create illuminated sign for emergency situation. It can be charged by any source of light and glows continuously for 12 hours. This tape can be used both indoors and outdoors.
These self-adhesive luminous tapes are made of acrylic, PET, PU, PP, etc. They are soft and can be cut into various shapes as required. You can create various patterns on their surface by screen printing or inkjet printing. These products can use various adhesives to realize different adhesive properties according to your requirements.
Main characteristic- They are made of Acrylic, PET,PU, PP,etc. with good fire resistance.
- Good performance for environment, both suitable for Hot and Cold area.
- It has good physical properties and is easy to cut, cut, engrave and paste.
- High Intensity, Various colors available, uniform permeability, good application effect, energy saving without power.
They are widely used in the ways of vessel, vehicle, underground, channels, fire fighting etc. and they also can be made into varied kinds of marks, signs and decoration indoors.
Usage- It can be applied to many kinds of printing. After printing, it can be coated protection film.
- It can be cut into various shapes as required. For example: strip cutting, die cutting, slicing, knife cutting, laser cutting and so on.
| Carton Capacity | 20.1*20.1*108cm |
| 1 roll/Carton | 50㎡ |
| Net Weight | Around 23kg |
| Gross weight | Around 25kg |
| Storage | Normal Temperature, Moisture proof , Ventilation |
Remark : All test data according to the current environment condition. Different conditions may have different test results.
