Solar Collector with Connecting Pipe (Horizontal) Manufacturer

Solar Collector with Connecting Pipe (Horizontal)

: http://himinsun.com/4-3-solar-collector-horizontal.html

Himin manifold collector JPH-50TX18

Product specification sheet
Overview
Himin's manifold collector includes the high efficiency vacuum tube. The exclusive use of the most advanced sputtered double cermet selective absorber coating gives the tube a 0.94 ≤ absorptivity ≤ 0.96 and 0.04 ≤ emissivity ≤ 0.06. The manifold collector has water inside the glass tube, and a bracket that goes with the collector. The water circulation is carried out inside the collector header, the tubes, and the water storage tank. Put together, each of those components makes up a direct system that is easily used in commercial and industrial solar hot water systems.

Physical Properties

Characteristic	Valve
Tube L/OD	1800mm/58mm
Tube no.	50PCS
Overall Length	3672mm
Overall Width	2450mm
Absorber Area	4.05m²
Aperture Area	4.71m²
Gross Area	7.6m²
Max Operating Pressure	0.1MPa
Weight, full of water	337kg

Key Material Properties

Characteristic	Valve
Vacuum tube	Borosilicate 3.3 Glass
Kind of Selective Coating	AlN/AIN-SS/Cu on glass
Header Tube	SUS304/0.8mm
Header Casing	SPGC with Color/0.5mm
Header Inlet/Outlet	DN25
Insulation	Polyurethane
Rubber Components	EPDM Silicone Rubber
Mounting Frame	Hot-dip Galvanized Steel/4mm

Performance Properties

Characteristic	Valve
Efficiency	0.66 (aperture area)
Heat Loss co efficiency	2.8W/(m²·K)

Installation Guidelines

Installation Angle

0-90°

Inquiry Form