Full Electric Aerial Work Platform Model I
Full electric aerial work platform is designed with Can bus line intelligent controller, automatic pot hole protection system, working chronometer, electric circuit fault code display device, extended platform, controller overtemperature protection device and tilt alarm system, etc.
Our full electric aerial work platform is mainly used in construction sites, power industry, communications, airports, convention centers, supermarkets, factories, stations, subway stations, and some other places.
Standard Configuration | ||||
Can bus line intelligent controller | Proportional controller | Automatic pot hole protection system | Charge lamp | Working chronometer |
Strut bar for safe overhaul | Transport standard forklift hole | Electric circuit fault code display | Low voltage alarm | Emergency descending button |
Extended platform | Charge protection | Horn | Tilt protection | Tilt alarm |
Controller overtemperature protection | High capacity traction battery | Overload limit | 4x2 drive | |
Optional Configuration | ||||
AC power source connected to platform | Strobe lamp |
Parameters of Full Electric Aerial Work Platform Model I
1KG=2.2LB 1Inch=25.4MM | |||
Model | JCPT8(Ⅰ) | JCPT9.5(Ⅰ) | |
Safe working load | kg | 450 | 400 |
Extended platform safe working load | kg | 112 | |
Outdoor use wind speed 45km/h | kg | 100 | |
Maximum working height | mm | 10000 | 11500 |
Maximum platform height | mm | 8000 | 9500 |
Overall length | mm | 2510 | |
Overall width | mm | 1150 | |
Overall height | mm | 2450 | |
Working platform size | mm | 2500X1120 | |
Platform extended size | mm | 1270 | |
Minimum ground clearance | mm | 120 | |
Wheel base | mm | 2080 | |
Minimum turning radius (inner wheel/ outer wheel) | mm | 1930/3740 | |
Drive motor | 2x24VDC/1.5kw | ||
Lifting motor | 24VDC/3kw | ||
Driving speed (furling state) | km/h | 4 | |
Lifting state | km/h | 1.1 | |
Lifting/ descending speed | sec | 70/60 | 89/88 |
Accumulator | 4x6V/250Ah | ||
Charger | 24V/25A | ||
Maximum gradeability | % | 25 | |
Working maximum allowable angle | 。 | 3 | |
Tyre | 406x125 | ||
Overall weight | kg | 2200 | 2280 |
Hylifting is a professional full electric aerial work platform manufacturer in China. Our main products include aerial working platforms, forklift trucks, stackers, pulley boards, hydraulic platforms, etc.
We have obtained ISO9001:2008 certification, ISO14001:2004 certification and ISO18001:2004 certification, and our products have passed GS and CE tests, so you can feel secure in using them.
If you are in need of full electric aerial work platforms or other lifting equipment, hydraulic machinery, please do not hesitate to contact us.