PM-100 Condenser microphones
- Human sound tailored and works in conjunction with electroacoustic technology for the best voice reproduction. It is suitable for professional small or medium scale performances and studios.
- The cardioid polar pattern reduces sound pickup from sides and rear.
- Rugged, all-metal designed with noise isolation and long service life.
- High-strength, antiskid, metal mesh enclosure provides extra protection.
- Built-in high-pass filter circuit to reduce breathes pickups, as well as surrounding noises (such as car engines, air conditioner noises, echoes, mechanical vibration noises and more)
- The PM-100 is used for professional voice recording, and is powered using an 11 to 52V phantom power supply, or using the built in phantom power supply in the mixing console, or using an individual Relacart P-48V1S single channel phantom power supply.
- The 3-pin XLRM connector on the microphone is a low resistant balanced output, the voice signal is transmitted using #2 and #3 pin, the #1 pin is the ground wire.
- The cables must be connected correctly with corresponding pins, 1-1, 2-2 and 3-3 to ensure the voice fidelity.
- No high-temperature exposure, keep the microphone in an environment with temperatures lower than 43°C and low humidity.
| Capsule: | Condenser |
| Polar Pattern: | Cardioid unidirectional |
| Frequency Response: | 50Hz-20khz |
| Sensitivity: | -44dB, 1V at 1Pa |
| Output Impedance | 280 Ω |
| Max. Sound Input: | 120dB，1kHz at 1%T.H.D. |
| Dynamic Range: | 115dB, 1kHz at max. SPL |
| S/N: | >72dB(A)，1kHz at 1Pa |
| Phantom Power Supply: | 11-52VDC |
| Current Consumption: | 4mA (Typical) |
| Output Connector: | Built-in 3-pin XLRM male plug |
| Dimension (mm): | φ51x190 |
| Weight (g): | Approximately 365 g |
- Capsule: The key component to transform voice into signal.
- Connector: Connect to receiver.
Related products
Send Message
Most Recent
More
Other Products
Videos
