Hammer Crusher

: http://pfcementmachinery.com/5-2-hammer-crusher.html

The PC series of hammer crusher is suitable for crushing various brittle materials, such as coal, chalk, gypsum, alum, brick, tile, limestone, etc., and the compressive strength of the material should not exceed 100MPa.

This hammer crusher is composed of rack, rotor, screen bar, hammer, and other components. The motor drives the rotor through the flexible coupling. The materials are crushed by the collision between the hammer and crushing plate caused by the rotation of rotor.

Technical Parameters

Model	Rotor Diameter / Length mm	Rotor Speed r/min	Inlet Size mm	Max. Feed Size mm	Discharge size mm	Capacity t/h	Motor Power KW	Weight t	Dimensions mm
PC-41	Ф400/175	1000	145×270	50	3	0.5	5.5	0.5	812×1056×1315
PC-44	Ф400/400	1500	145×450	100	10	5~8	7.5	0.9	744×942×878
PC-64	Ф600/400	1000	295×450	100	15	10~12	18.5	1.03	1054×972×1117
PC-66	Ф600/600	1000	295×570	100	10	12~18	45	2.14	1315×840×1501
PC-86	Ф800/600	1000	350×570	200	10	20-25	55	2.45	1515×2586×1040
PC-88	Ф800/800	1000	350×850	200	15	35-45	55	3.05	1515×2831×1040
PC-108	Ф1000/800	1000	580×850	200	13	25-40	110	6.5	3206×2210×1515
PC-1010	Ф1000/1000	1000	580×1060	200	15	40-60	132	7.59	3514×2230×1516
PC-1010	Ф1000/1000	1000	580×1060	200	10	30-50	160	7.59	3514×2230×1518
PC-1010	Ф1000/1000	1000	580×1060	200	8	25-35	185	7.59	3514×2230×1518
PC-1212	Ф1250/1250	750	650×1330	200	20	90-110	185	19.1	4475×3162×2250
PC-1414	Ф1400/1400	750	1050×1540	250	20	120-170	280	17.2	2790×2800×2310
PC-1618	Ф1600/1800	590	1200×1740	350	20	220-280	500	32.4	6256×3620×2700

Note: Parameter values listed above are only for reference. The actual data is subject to the signed contract.

Related Names
Coal Crushing Unit | Limestone Crushing Equipment | Recycling Crusher