Magnetic Lock Sets
Products description
The magnetic lock sets are usually used to lock the injection mold through the use of a string magnetic force.
- Temperature resistance properties: functions will not be influenced by temperature changes.
- Long service life. The reduction of the magnetic force will not be more than 1%.
- Simple loading and unloading. One magnetic shutter can be applied to different molds and can be used repeatedly.
- Stable force. The mold is locked using a permanent, easily adjustable magnetic force.
- Convenient installation. It can be installed on mold sides A and B without accuracy requirements.
- It is produced separately from the mold.
| Type | Pole Distance (MM) | Length (MM) | Height (MM) | Width (MM) | |
| MLK-400 | 100 | 125 | 60 | 35 | |
| MLK-200 | 100 | 125 | 45 | 35 | |
| MLK-100 | 52 | 70 | 40 | 30 | |
| MLK-80 | 63 | 85 | 40 | 30 | |
| MLK-60 | 52 | 70 | 40 | 30 |
| Type | Clamping Force | Heat-resistant Temperature | Adhesive Strength/1Set (20℃) | A | B | S | L | T | t | D1 | D2 | d1 | d2 |
| MLK | 40 | ≤ 80℃ | 392.34 N (40kgf) | 63 | 25 | 60 | 80 | 25 | 12 | 18 | 22 | 9 | 14 |
| 80 | ≤200℃ | 784.5N (80kgf) | |||||||||||
| 100 | ≤80℃ | 980.7N 40 (100kgf) | 100 | 39 | 79 | 126 | 40 | 15 | 30 | 34 | 11 | 18 | |
| 200 | ≤200℃ | 1961.3N (200kgf) | |||||||||||
| 100 | ≤200℃ | 980.6N (100kgf) |
| Type | Clamping Force | Heat-resistant Temperature | Adhesive Strength/1Set (20℃) | A | S | L | T | D1 | D2 | d1 | d2 |
| MLKC (Compact) | 20 | ≤80℃ | 196.1N (20kgf) | 36 | 36 | 50 | 25 | 17.5 | 22 | 6.6 | 11 |
| 40 | ≤200℃ | 392.N (40kgf) | |||||||||
| 50 | ≤ 80℃ | 390.31N (50kgf) | 52 | 70 | 40 | 34 | 9 | 14 |
Related products
Send Message
Most Recent
More
Other Products
Videos
