KGH6 High Pressure Eco-friendly Crawler Drilling Rig
The KGH6 high pressure eco-friendly crawler drilling rig is an update version of our previous product, KG940A type crawler drilling machine. Several new features will be listed below. Contact us if you have any questions about this eco-friendly boreholl drill.
Feature
1. Dry type dust collecting device
A dry type dust collecting device is added to the crawler drilling equipment, making the operation process more eco-friendly.
2. Powerful propulsion and rotating mechanism
The new type rotating device of our crawler drilling rig consists of large torque cycloid hydraulic motor, planetary reducer, providing plenty of torque reserve. Thus the drill rod blocking risk is greatly reduced.
3. Powerful engine
The YC-4D80 type four-cylinder diesel engine is adopted for our high pressure eco-friendly crawler drilling rig. This powerful engine can work really stably.
4. Wide application
After optimization, the jib lubbing mechanism and round drill arm of this borehole driller are easy to be adjusted. The covered operation area is extended to a large degree, and the horizontal hole can be drilled at a low position.
Specifications
| Model | KGH6 Drilling Rig |
| Rock hardness | F = 6-20 |
| Hole diameter | Ф105-152mm |
| Economical drill depth | 25m |
| Pressure | 1.0-2.4Mpa |
| Air consumption | 12-24m³/min |
| Rotating speed | 0-100r/min |
| Rotation torque | 2800N.m |
| Lifting capacity | 22000N |
| Propulsion type | Hydro-Cylinder-Chain |
| Propulsion length | 3000mm |
| Propulsion speed | 580mm/s |
| Drill rod specification | Φ76×3000mm/Φ89×3000mm |
| Gradeability | 30° |
| Ground clearance | 320mm |
| Walking speed | 0-2km/h |
| Drill arm rising angle | Down 25°, up 45°, total 70° |
| Drill arm swing angle | Left 45°, right 45°, total 90° |
| Carriage swing angle | Left 95°, right 50°, total 145° |
| Carriage pitch angle | 180° |
| Max. frame floating angle | ±10° |
| Carriage compensation | 1200mm |
| Diesel engine | YC-4D80 (58kW, 2400r/min) |
| Overall Dimension(L×W×H) | 5355×2330×2365mm |
| Total weight | 6500kg |
| Note | Pneumatic-hydraulic driving mechanism, dry type dust collector, and speed reducer are available. |
Recommend parts for KGH6 high pressure eco-friendly crawler drilling rig
Drill bit: Φ115
Drill hammer: HD45A
Drill rod: Φ76×3000mm
Recommended screw air compressor for KGH6 high pressure eco-friendly crawler drilling rig
