Scale and Corrosion Inhibitor (for High Hardness Water)

Scale and Corrosion Inhibitor (for High Hardness Water)
Scale and Corrosion Inhibitor (for High Hardness Water)
Request a Quote

    Properties:
    This product is composed of organophosphine acid, polycarboxylic acid, sulfosalt copolymers, corrosion inhibitor and special surfactants. It can be used in circulating cooling water in which the calcium hardness and alkalinity is up to 1500ppm and operation is under high cycles of concentration.

    Specification:
    Items Index
    Appearance Light yellow liquid
    Solid content % 45.0min
    Density ( 20 ℃ ) g/cm3 1.20min
    pH ( 1 % water solution ) 2.0±1.0

    Usage:
    Add XT-658 into plastic dosing tank or box, dilute it with water. Add continuously the liquid into inlet of dosage pump or metering valve (outlet of collecting tank). The dosage of 10-30mg/l is preferred (based on the quantity of makeup water)

    Package and Storage:
    200L plastic drum, IBC(1000L), or as customers’ requirement. Storage for ten months in shady room and dry place

    Safety Protection:
    Weak acid. Avoid contact with eyes or skin. In case of contact, rinse with plenty of water.

    Related products
    Send Message
    Inquiry
    Inquiry