Uninterruptible Power Supply Cabinet (UPS)
The power distribution unit is designed to provide emergency power for lighting and critical equipment when the main supply is cut, thus avoiding any loss caused by a main power supply failure. This unit is widely used in locations where a steady, continuous power is needed, such as hospitals, schools, restaurants, and more.
The frame of our power distribution unit is constructed via steel plate bending and angle steel welding. The internal structures of this power distribution unit are zinc plated or plastic spray painted to maximize corrosion resistant performance. The battery pack fits perfectly inside the unit and provides a minimum of a 90-minute power supply. This can easily be expanded to meet higher requirements.
Rated voltage: 380V/220V±15%
Rated frequency: 50HZ±2%
Output rated power: 0.5/1/2/3/5KW
Emergency power supply time: ≥90mins（expandable）
Emergency conversion time: ≤10ms
- Ambient temperature: -50℃~+40℃, 24h average temperature ≤+36℃.
- Altitude: ≤ 2000m.
- Relative humidity: ≤50% at the highest temperature +40℃. Higher relative humidity is allowed at low temperature, for example, 90% at +20℃. Condensation may appear because of temperature range, and this phenomenon should be considered.
- Gradient: ≤ 5°, vertical installation.
- Environments without corrosive atmosphere and severe vibration, and impact.
