Metal Deck Roll Forming Machine
Description of Deck Floor Roll Forming Machine
This metal forming equipment is made up of hydraulic decoiler, main forming machine, hydraulic cutting, product stand, hydraulic system and electric system.
The Chart of Process Flow
decoiling→active feeding→roll forming→measuring length→cutting to length→putting product to stand
Technical Parameters of Deck Floor Roll Forming Machine
1) Manual Inner Tight Decoiler
a. coil inner diameter: 450mm-700mm
b. max width of coiling: 1200mm
c. max weight of loading: 6000kg
d. hydraulic station power: 3kw
e. motor power: 3kw
f. oil cylinder inner diameter: 120mm
g. working pressure: 10Mpa
2) Main Forming Machine
a. number of forming steps: 22
b. material of shaft: 45# steel adjustable treatment.
Outer diameter: 80mm
c. material of roller15 GCR bearing steel treatment HRC58-60
d. main motor power5.5kw
e. forming speed: 8-10m/min
f. stand350# steel welding
g. the plating chromium of roller surface 0.05mm
3) Hydraulic Cutter
a. material of blade: Cr12 with quenched treatment 60-62
b. cutting system: adopt advanced hydraulic drive, automatic cut after forming, no distortion, no waste, high safe factor(main motor stops and then cuts)
4) Electrical System
The main computer (PLC): Tai Da DVP14ES
5) Hydraulic System
a. Adopting advanced hydraulic system of TaiWan
b. Power:4KW
6) The whole machine consists of: automatic inner tight decoiler: 1set; main forming machine: 1 set; hydraulic system: 1 set; electrical system: 1 set, normal product stand: 3 set.
Other search items: deck roll forming line
