Rubber Coarse Crusher

: http://sk-rubbermachine.com/6-3-rubber-coarse-crusher/index.html

Rubber Crusher/ Rubber Cracker/ Rubber Grinder

Application:
The rubber coarse crusher is applicable for cracking scrap rubber into small pieces that can then be processed.

Features:
1. The roller is made of chilled cast iron with vanadium and titanium alloys. The roller face is hard and anti-wear. Both the front roller and the back roller are fluted. The internal cavity of the roller is processed to evenly distribute temperature.
2. The machine is equipped with an overload protection device to prevent the major components from being damaged due to overloading.
3. The machine is also equipped with an emergency device. When an emergency happens, just draw the safety pull rod, and the machine will stop immediately.
4. Transmission uses hardened NGW planetary reducer or herringbone gear reducer.
5. The turning of the cylinder sieve will repeatedly send back unqualified large rubber chips for further cracking.

Main Technical Parameters:

Type		ZKC-560A	ZKC-560B	ZKC-560D
Working Diameter of Front Roll(mm)		510	510	510
Working Diameter of Back Roll(mm)		560	560	560
Working Length of Rolls (mm)		800	800	800
Linear Speed of Front Roll(m/min)		23.7	24.3	23.37
Linear Speed of Front/Rear Rolls		1:1.55	1:1.55	1:1.55
Max. Nip		15	15	15
Capacity (Kg/h)		2000	2000	2000
Main Motor Model		Y315M1-6	Y315L1-8	Y315L2-8
Motor Power(KW)		90	90	110
Motor Rotating Speed(r/min)		980	740	740
Speed Reducer		Inverted-Y Speed Reducer	NGW Planetary Hard-Gear Speed Reducer
Reduction Ratio		11.6	34.65	35.64
Overall Dimensions(mm)	Length	5400	5430	5500
	Width	2330	2330	2330
	Height	2100	2100	2100
Weight(KG)		17500	20000	20000