High Transparent Fumed LSR (Pouring)
Applications
This liquid silicone rubber (LSR) is typically used in pouring process for making silicone rubber moulds and miscellaneous pieces that require high transparency.
Features
- Rapid vulcanization, good dimensional stability and processability;
- Non-toxic and safe, food grade;
- High tear strength, non-yellowing, easy de-molding;
Approvals
ROHS, REACH, FDA, CA65, EN71-3, EN14372, PAHS, PFOA, CPSIA, Dimethyl Cyclosiloxane, etc.
Test
Rheometer test, 120℃, 5min
Technical Data
- Model:
HT-D9200A/B - Appearance: Translucent
- Viscosity: 5K-1W
- Hardness (Shore A): 20
- Density (g/cm3): 1.06
- Tensile strength (Mpa): 6
- Elongation (%): 700
- Tear strength (K N/m): 15
- Model:
HT-D9300A/B - Appearance: Translucent
- Viscosity: 5K-1W
- Hardness (Shore A): 30
- Density (g/cm3): 1.08
- Tensile strength (Mpa): 6
- Elongation (%): 700
- Tear strength (K N/m): 15
- Model:
HT-D9400A/B - Appearance: Translucent
- Viscosity: 5K-1W
- Hardness (Shore A): 40
- Density (g/cm3): 1.1
- Tensile strength (Mpa): 8
- Elongation (%): 650
- Tear strength (K N/m): 20
- Model:
HT-D9500A/B - Appearance: Translucent
- Viscosity: 1W-2W
- Hardness (Shore A): 50
- Density (g/cm3): 1.12
- Tensile strength (Mpa): 10
- Elongation (%): 600
- Tear strength (K N/m): 30
- Model:
HT-D9600A/B - Appearance: Translucent
- Viscosity: 1W-2W
- Hardness (Shore A): 60
- Density (g/cm3): 1.12
- Tensile strength (Mpa): 10
- Elongation (%): 450
- Tear strength (K N/m): 30
- Model:
HT-D9700A/B - Appearance: Translucent
- Viscosity: 2W-3W
- Hardness (Shore A): 70
- Density (g/cm3): 1.14
- Tensile strength (Mpa): 8
- Elongation (%): 400
- Tear strength (K N/m): 25
- Model:
HT-D9800A/B - Appearance: Translucent
- Viscosity: 2W-3W
- Hardness (Shore A): 80
- Density (g/cm3): 1.12
- Tensile strength (Mpa): 7
- Elongation (%): 260
- Tear strength (K N/m): 15
Related products
Send Message
Most Recent
More
Other Products
Videos
