Platform CNC Waterjet Cutting Machine (Gantry Type)
Platform CNC Waterjet Cutting Machine(Gantry Type)
Detailed Description
1. Teenking waterjet multipoint lubricating system can lubricate every moving joint of the TK-Trump-CNCcutting platform, which enables the machine to continue to run smoothly.
2. The unique revolving dustproof design of the CNC waterjet cutting machine effectively protects the interior of the CNC cutting platformand prevents entry of abrasive dust and splashing water, which contributes tothe longer life of all moving parts.
3. Made using advanced technology, Teenking waterjet cutter has received two patents.
① Patent No. ZL200820205793.0
Long-screw aligning system can ensure the straightness of ball screw andprevent it from dropping and bending due to its gravity, which eliminates thepossibility of increasing the load of servomotor and accelerating the wear of the screw.
② Patent No. ZL200820205793.0
The nut drive ballscrew design eliminates the resonance and sloshing caused by high speedrotation of ball screw and thus ensures stability of high speed cutting.
4. The ultra-strength support for cutting head effectively reduces the shock ofthe cutting head.
5. All crash-resistant proximity switchesare imported from
6. The cutting head can tilt /-60 degrees in X direction for cutting, therebywidening the cutting range.
7. The pneumatic water level control system (optional) can help realize cuttingunderwater, thus minimizing noise and spattering.
8. The all-stainless steel casing keeps the appearance of platform CNC waterjet cutting machine for years to come.
TechnicalSpecifications
TK-Trump-G0806 PlatformCNC Waterjet Cutting Machine (Gantry Type)
| Model | TK-Trump-G0806 | |
| Travel of each axis | X-axis | 900mm |
| Y-axis | 700mm | |
| Z-axis | 220mm /320mm (optional) | |
| Cutting range | X-axis | 800mm |
| Y-axis | 600mm | |
| Z-axis | 200mm /300mm (optional) | |
| Drive motor | AC servomotor with coder (Panasonic, YASKAWA or FUJI) | |
| Drive component | X, Y-axis drive: ABBA or TBI precise ball screw, ABBA or HIWIN linear guide-way Z-axis drive: precise linear slider stage Three-axis full servo drive (available of cutting 3D graphics) | |
| Maximal workpiece weight | 4000kg (500kg/m2) | |
| NC control system | TKW-NC Studio three-axis CNC water cutting control system | |
| Control precision | X-axis, Y-axis, Z-axis: 0.001mm | |
| Reposition accuracy | X-axis, Y-axis, Z-axis: less than ±0.04mm | |
| Cutting tolerance | Less than ±0.05mm | |
| Plane straightness accuracy | Less than ±0.05mm | |
| Plane verticality | Less than ±0.04mm/300mm | |
| Moving speed | 0-18m/min. | |
| Cutting speed | 0-15m/min | |
| Water and dust proof | All moving parts are tightly protected against water and dust, the casing of the CNC cutting platform is totally made using stainless steel. | |
| Protection of power outage | The computer can accurately remember and restore the position of processing point when power cut occurs in the process of cutting. | |
| Lubricating system | The fully automatic lubricating system does not need any manual operation, automatically lubricating all moving parts. | |
| Water level control system | Water level control to perform cutting underwater, splashless and noiseless. (optional) | |
| Sludge removal system | The settled sludge is forced toward all directions during the cutting, and then sucked into the sludge removal system via the pre-embedded pipelines. This greatly saves the cost by eliminating manual operation and machine stop time. (optional) | |
| Automatic abrasive supply system | It uses air pressure to continuously, stably deliver abrasive from an externally-mounted container to the cutting head. (optional) | |
TK-Trump-G1520 Platform CNC Waterjet CuttingMachine (Gantry Type)
| Model | T K-Trump-G1520 | |
| Travel of each axis | X-axis | 1600mm |
| Y-axis | 2100mm | |
| Z-axis | 220mm /320mm (optional) | |
| Cutting range | X-axis | 1500mm |
| Y-axis | 2000mm | |
| Z-axis | 200mm /300mm (optional) | |
| Drive motor | AC servomotor with coder (Panasonic, YASKAWA or FUJI) | |
| Drive component | X, Y-axis drive: ABBA or TBI precise ball screw, ABBA or HIWIN linear guide-way Z-axis drive: precise linear slider stage Three-axis full servo drive (available of cutting 3D graphics) | |
| Maximal workpiece weight | 4000kg (500kg/m2) | |
| NC control system | TKW-NC Studio three-axis CNC water cutting control system | |
| Control precision | X-axis, Y-axis, Z-axis: 0.001mm | |
| Reposition accuracy | X-axis, Y-axis, Z-axis: less than ±0.04mm | |
| Cutting tolerance | Less than ±0.05mm | |
| Plane straightness accuracy | Less than ±0.05mm | |
| Plane verticality | Less than ±0.04mm/300mm | |
| Moving speed | 0-18m/min. | |
| Cutting speed | 0-15m/min | |
| Water and dust proof | All moving parts are tightly protected against water and dust, the casing of the CNC cutting platform is totally made using stainless steel. | |
| Protection of power outage | The computer can accurately remember and restore the position of processing point when power cut occurs in the process of cutting. | |
| Lubricating system | The fully automatic lubricating system does not need any manual operation, automatically lubricating all moving parts. | |
| Water level control system | Water level control to perform cutting underwater, splashless and noiseless. (optional) | |
| Sludge removal system | The settled sludge is forced toward all directions during the cutting, and then sucked into the sludge removal system via the pre-embedded pipelines. This greatly saves the cost by eliminating manual operation and machine stop time. (optional) | |
| Automatic abrasive supply system | It uses air pressure to continuously, stably deliver abrasive from an externally-mounted container to the cutting head. (optional) | |
TK-Trump-G2015 PlatformCNC Waterjet Cutting Machine (Gantry Type)
| Model | T K-Trump-G2015 | |
| Travel of each axis | X-axis | 2100mm |
| Y-axis | 1600mm | |
| Z-axis | 220mm /320mm (optional) | |
| Cutting range | X-axis | 2000mm |
| Y-axis | 1500mm | |
| Z-axis | 200mm /300mm (optional) | |
| Drive motor | AC servomotor with coder (Panasonic, Yaskawa or Fuji) | |
| Drive component | X, Y-axis drive: ABBA or TBI precise ball screw, ABBA or HIWIN linear guide-way Z-axis drive: precise linear slider stage Three-axis full servo drive (available of cutting 3D graphics) | |
| Maximal workpiece weight | 4000kg (500kg/m2) | |
| NC control system | TKW-NC Studio three-axis CNC water cutting control system | |
| Control precision | X-axis, Y-axis, Z-axis: 0.001mm | |
| Reposition accuracy | X-axis, Y-axis, Z-axis: less than ±0.04mm | |
| Cutting tolerance | Less than ±0.05mm | |
| Plane straightness accuracy | Less than ±0.05mm | |
| Plane verticality | Less than ±0.04mm/300mm | |
| Moving speed | 0-18m/min. | |
| Cutting speed | 0-15m/min | |
| Water and dust proof | All moving parts are tightly protected against water and dust, the casing of the CNC cutting platform is totally made using stainless steel. | |
| Protection of power outage | The computer can accurately remember and restore the position of processing point when power cut occurs in the process of cutting. | |
| Lubricating system | The fully automatic lubricating system does not need any manual operation, automatically lubricating all moving parts. | |
| Water level control system | Water level control to perform cutting underwater, splashless and noiseless. (optional) | |
| Sludge removal system | The settled sludge is forced toward all directions during the cutting, and then sucked into the sludge removal system via the pre-embedded pipelines. This greatly saves the cost by eliminating manual operation and machine stop time. (optional) | |
| Automatic abrasive supply system | It uses air pressure to continuously, stably deliver abrasive from an externally-mounted container to the cutting head. (optional) | |
TK-Trump-G2030 Platform CNC Waterjet Cutting Machine (Gantry Type)
| Model | T K-Trump-G2030 | |
| Travel of each axis | X-axis | 2100mm |
| Y-axis | 3100mm | |
| Z-axis | 220mm /320mm (optional) | |
| Cutting range | X-axis | 2000mm |
| Y-axis | 3000mm | |
| Z-axis | 200mm /300mm (optional) | |
| Drive motor | AC servomotor with coder (Panasonic, YASKAWA or FUJI) | |
| Drive component | X, Y-axis drive: ABBA or TBI precise ball screw, ABBA or HIWIN linear guide-way Z-axis drive: precise linear slider stage Three-axis full servo drive (available of cutting 3D graphics) | |
| Maximal workpiece weight | 4000kg (500kg/m2) | |
| NC control system | TKW-NC Studio three-axis CNC water cutting control system | |
| Control precision | X-axis, Y-axis, Z-axis: 0.001mm | |
| Reposition accuracy | X-axis, Y-axis, Z-axis: less than ±0.04mm | |
| Cutting tolerance | Less than ±0.05mm | |
| Plane straightness accuracy | Less than ±0.05mm | |
| Plane verticality | Less than ±0.04mm/300mm | |
| Moving speed | 0-18m/min. | |
| Cutting speed | 0-15m/min | |
| Water and dust proof | All moving parts are tightly protected against water and dust, the casing of the CNC cutting platform is totally made using stainless steel. | |
| Protection of power outage | The computer can accurately remember and restore the position of processing point when power cut occurs in the process of cutting. | |
| Lubricating system | The fully automatic lubricating system does not need any manual operation, automatically lubricating all moving parts. | |
| Water level control system | Water level control to perform cutting underwater, splashless and noiseless. (optional) | |
| Sludge removal system | The settled sludge is forced toward all directions during the cutting, and then sucked into the sludge removal system via the pre-embedded pipelines. This greatly saves the cost by eliminating manual operation and machine stop time. (optional) | |
| Automatic abrasive supply system | It uses air pressure to continuously, stably deliver abrasive from an externally-mounted container to the cutting head. (optional) | |
TK-Trump-G2040 Platform CNC Waterjet Cutting Machine (Gantry Type)
| Model | T K-Trump-G 2040 | |
| Travel of each axis | X-axis | 2100mm |
| Y-axis | 4100mm | |
| Z-axis | 220mm /320mm (optional) | |
| Cutting range | X-axis | 2000mm |
| Y-axis | 4000mm | |
| Z-axis | 200mm /300mm (optional) | |
| Drive motor | AC servomotor with coder (Panasonic, YASKAWA or FUJI) | |
| Drive component | X, Y-axis drive: ABBA or TBI precise ball screw, ABBA or HIWIN linear guide-way Z-axis drive: precise linear slider stage Three-axis full servo drive (available of cutting 3D graphics) | |
| Maximal workpiece weight | 4000kg (500kg/m2) | |
| NC control system | TKW-NC Studio three-axis CNC water cutting control system | |
| Control precision | X-axis, Y-axis, Z-axis: 0.001mm | |
| Reposition accuracy | X-axis, Y-axis, Z-axis: less than ±0.04mm | |
| Cutting tolerance | Less than ±0.05mm | |
| Plane straightness accuracy | Less than ±0.05mm | |
| Plane verticality | Less than ±0.04mm/300mm | |
| Moving speed | 0-18m/min. | |
| Cutting speed | 0-15m/min | |
| Water and dust proof | All moving parts are tightly protected against water and dust, the casing of the CNC cutting platform is totally made using stainless steel. | |
| Protection of power outage | The computer can accurately remember and restore the position of processing point when power cut occurs in the process of cutting. | |
| Lubricating system | The fully automatic lubricating system does not need any manual operation, automatically lubricating all moving parts. | |
| Water level control system | Water level control to perform cutting underwater, splashless and noiseless. (optional) | |
| Sludge removal system | The settled sludge is forced toward all directions during the cutting, and then sucked into the sludge removal system via the pre-embedded pipelines. This greatly saves the cost by eliminating manual operation and machine stop time. (optional) | |
| Automatic abrasive supply system | It uses air pressure to continuously, stably deliver abrasive from an externally-mounted container to the cutting head. (optional) | |
TK-Trump-G2515 Platform CNC Waterjet Cutting Machine (Gantry Type)
| Model | T K-Trump-G 2515 | |
| Travel of each axis | X-axis | 2600mm |
| Y-axis | 1600mm | |
| Z-axis | 220mm /320mm (optional) | |
| Cutting range | X-axis | 2500mm |
| Y-axis | 1500mm | |
| Z-axis | 200mm /300mm (optional) | |
| Drive motor | AC servomotor with coder (Panasonic, YASKAWA or FUJI) | |
| Drive component | X, Y-axis drive: ABBA or TBI precise ball screw, ABBA or HIWIN linear guide-way Z-axis drive: precise linear slider stage Three-axis full servo drive (available of cutting 3D graphics) | |
| Maximal workpiece weight | 4000kg (500kg/m2) | |
| NC control system | TKW-NC Studio three-axis CNC water cutting control system | |
| Control precision | X-axis, Y-axis, Z-axis: 0.001mm | |
| Reposition accuracy | X-axis, Y-axis, Z-axis: less than ±0.04mm | |
| Cutting tolerance | Less than ±0.05mm | |
| Plane straightness accuracy | Less than ±0.05mm | |
| Plane verticality | Less than ±0.04mm/300mm | |
| Moving speed | 0-18m/min. | |
| Cutting speed | 0-15m/min | |
| Water and dust proof | All moving parts are tightly protected against water and dust, the casing of the CNC cutting platform is totally made using stainless steel. | |
| Protection of power outage | The computer can accurately remember and restore the position of processing point when power cut occurs in the process of cutting. | |
| Lubricating system | The fully automatic lubricating system does not need any manual operation, automatically lubricating all moving parts. | |
| Water level control system | Water level control to perform cutting underwater, splashless and noiseless. (optional) | |
| Sludge removal system | The settled sludge is forced toward all directions during the cutting, and then sucked into the sludge removal system via the pre-embedded pipelines. This greatly saves the cost by eliminating manual operation and machine stop time. (optional) | |
| Automatic abrasive supply system | It uses air pressure to continuously, stably deliver abrasive from an externally-mounted container to the cutting head. (optional) | |
TK-Trump-G3015 Platform CNC Waterjet Cutting Machine (Gantry Type)
| Model | T K-Trump-G 3015 | |
| Travel of each axis | X-axis | 3100mm |
| Y-axis | 1600mm | |
| Z-axis | 220mm /320mm (optional) | |
| Cutting range | X-axis | 3000mm |
| Y-axis | 1500mm | |
| Z-axis | 200mm /300mm (optional) | |
| Drive motor | AC servomotor with coder (Panasonic, YASKAWA or FUJI) | |
| Drive component | X, Y-axis drive: ABBA or TBI precise ball screw, ABBA or HIWIN linear guide-way Z-axis drive: precise linear slider stage Three-axis full servo drive (available of cutting 3D graphics) | |
| Maximal workpiece weight | 4000kg (500kg/m2) | |
| NC control system | TKW-NC Studio three-axis CNC water cutting control system | |
| Control precision | X-axis, Y-axis, Z-axis: 0.001mm | |
| Reposition accuracy | X-axis, Y-axis, Z-axis: less than ±0.04mm | |
| Cutting tolerance | Less than ±0.05mm | |
| Plane straightness accuracy | Less than ±0.05mm | |
| Plane verticality | Less than ±0.04mm/300mm | |
| Moving speed | 0-18m/min. | |
| Cutting speed | 0-15m/min | |
| Water and dust proof | All moving parts are tightly protected against water and dust, the casing of the CNC cutting platform is totally made using stainless steel. | |
| Protection of power outage | The computer can accurately remember and restore the position of processing point when power cut occurs in the process of cutting. | |
| Lubricating system | The fully automatic lubricating system does not need any manual operation, automatically lubricating all moving parts. | |
| Water level control system | Water level control to perform cutting underwater, splashless and noiseless. (optional) | |
| Sludge removal system | The settled sludge is forced toward all directions during the cutting, and then sucked into the sludge removal system via the pre-embedded pipelines. This greatly saves the cost by eliminating manual operation and machine stop time. (optional) | |
| Automatic abrasive supply system | It uses air pressure to continuously, stably deliver abrasive from an externally-mounted container to the cutting head. (optional) | |
TK-Trump-G3015DL Platform CNC Waterjet Cutting Machine (GantryType)
| model | TK-Trump-G3015DL | |
| Travel of each axis | X-axis | 3100mm |
| Y-axis | 1600mm | |
| Z-axis | 220mm/320mm (optional) | |
| Cutting range | X-axis | 3000mm |
| Y-axis | 1500mm | |
| Z-axis | 200mm/300mm (optional) | |
| Drive motor | AC servomotor with coder (Panasonic, YASKAWA or FUJI) | |
| Drive component | X, Y-axis drive: ABBA or TBI precise ball screw, ABBA or HIWIN linear guide-way Z-axis drive: precise linear slider stage Three-axis full servo drive (available of cutting 3D graphics) | |
| Maximal work piece weight | 4000kg (500kg/m2) | |
| NC control system | TKW-NC Studio three-axis CNC water cutting control system | |
| Control precision | X-axis, Y-axis, Z-axis: 0.001mm | |
| Reposition accuracy | X-axis, Y-axis, Z-axis: less than ±0.04mm | |
| Cutting tolerance | Less than ±0.05mm | |
| Plane straightness accuracy | Less than ±0.05mm | |
| Plane verticality | Less than ±0.04mm/300mm | |
| Moving speed | 0-18m/min. | |
| Cutting speed | 0-15m/min | |
| Water and dust proof | All moving parts are tightly protected against water and dust, the casing of the CNC cutting platform is totally made using stainless steel. | |
| Protection of power break | The computer can accurately remember and restore the position of processing point when power cut occurs in the process of cutting. | |
| Lubricating system | The fully automatic lubricating system does not need any manual operation, automatically lubricating all moving parts. | |
| Water level control system | Water level control to perform cutting underwater, splashless and noiseless. (optional) | |
| Sludge removal system | The settled sludge is forced toward all directions during the cutting, and then sucked into the sludge removal system via the pre-embedded pipelines. This greatly saves the cost by eliminating manual operation and machine stop time. (optional) | |
| Automatic abrasive supply system | It uses air pressure to continuously, stably deliver abrasive from an externally-mounted container to the cutting head. (optional) | |
TK-Trump-G3020 PlatformCNC Waterjet Cutting Machine (Gantry Type)
| Model | T K-Trump-G 3020 | |
| Travel of each axis | X-axis | 3100mm |
| Y-axis | 2100mm | |
| Z-axis | 220mm /320mm (optional) | |
| Cutting range | X-axis | 3000mm |
| Y-axis | 2000mm | |
| Z-axis | 200mm /300mm (optional) | |
| Drive motor | AC servomotor with coder (Panasonic, YASKAWA or FUJI) | |
| Drive component | X, Y-axis drive: ABBA or TBI precise ball screw, ABBA or HIWIN linear guide-way Z-axis drive: precise linear slider stage Three-axis full servo drive (available of cutting 3D graphics) | |
| Maximal workpiece weight | 4000kg (500kg/m2) | |
