Two Colour Slipper Upper Strap Injection Moulding Machine, EB208D/EB210D
This injection moulding machine produces upper straps out of raw materials like TPR, PVC and PUR. What makes this footwear injection machine so unique is that it can make single- and two-colour products. Apart from this advantage, this injection moulding machine is equipped with 10 sets of molds, meaning that it can produce several pairs of slipper straps at a time.
| Item | Unit | | |
| Raw materials | TPR, PVC | ||
| Stations | 8 | 10 | |
| Screw diameter | mm | 50*2 | |
| Maximum injection volume | CC | 390*2 | |
| Injection pressure | MPa | 100 | |
| Clamping force | Tons | 80*2 | |
| Yield | Pairs/hour | 80-200 | |
| Mould space | mm | 360*400*150 | |
| Heating power | kW | 6.5*2 | |
| Total power | kW | 35 | |
| Dimensions | cm | 620×260×220 | 650*290*195 |
| Machine weight | Tons | 13 | 13.2 |
| Oil consumption | L | 600*2 | |
-
Water cooling system
-
Drying hopper
-
Energy-saving hydraulic servo control system
- Large template design and superior clamping force;
- This injection moulding machine has a block cylinder that can effectively insulate heat and prevent leakage;
-
This slipper upper strap injection moulding machine has a user-friendly PLC control system with industrial human-machine interface (HMI);
-
PLC control system
-
PLC
-
HMI interface
-
-
Mould water cooling system allows for fast formation of products;
-
Servo system is optional to reduce costs and save energy;
-
Servo system
-
-
Following safety measures have been adopted to ensure stable and safe operation;
-
Safety sign
-
Emergency stop button
-
Rotary table anti-lifting switch
-
The purposes of these measures are to protect operators.
- Safety door is installed to allow operators to shut down the injection machine when malfunctions happen.
- The safety sign shows dangerous zones.
- Photoelectric switch can stop the injection moulding machine if operators accidentally extend their hands into the working machine.
- Emergency stop button allows operators to close the injection moulding machine when something unusual happens.
- Turn table anti-lift switch sends electric signals to shut down the injection moulding machine to prevent the turn table from moving away from the wheel.
- Safety net is set up to prevent misoperation.
-
Cooling tower can be connected with the footwear injection moulding machine to bring down the temperature of materials;
-
Crusher is used for the recycling of used materials;
-
Vertical mixer is used to mix materials with different colours into the same colour;
| Parts list | ||
| Toolbox | / | 1pc |
| Allen key | 1.5-10 | 9 sets |
| Open-end wrench | 6-24 | 8 sets |
| Phillips screwdriver (small) | / | 2pcs |
| Phillips screwdriver (large) | / | 1pc |
| Adjustable wrench | 250mm | 1pc |
| Heating ring | Ø90*80 mm | 2pcs |
| Heating ring | Ø65*50 mm | 2pcs |
| Heating rod | Ø15.8*100 mm | 2pcs |
| Proximity switch | Ø 25*25mm | 1pc |
| Proximity switch | Ø 12*12mm | 1pc |
| Thermoelectric coupling | K type/5M | 2pcs |
| Oil seal | / | 2pcs |
| Plugging rod | / | 1pc |
| Plugging bushing | / | 1pc |
| Copper gasket | / | 1pc |
| Injection nozzle | / | 1pc |
| User manual | / | 1 |
