H-RN4 Solid Carbide End Mill for Hardened Steel Machining - Corner Radius - 4 Flutes - Long Neck
Request a quote
Unit: mm
| Order Code | Cutting Diameter (D) | Length of Cut (Lc) | Corner Radius (r) | Neck Length (L1) | Neck Diameter (d2) | Overall Length (L) | Shank Diameter (d) | Type |
H-RN4-06005 | 6 | 6 | 0.5 | 18 | 5.8 | 75 | 6 | A |
H-RN4-06010 | 6 | 6 | 1 | 18 | 5.8 | 75 | 6 | B |
H-RN4-08005 | 8 | 8 | 0.5 | 24 | 7.8 | 100 | 8 | B |
H-RN4-08010 | 8 | 8 | 1 | 24 | 7.8 | 100 | 8 | B |
H-RN4-10005 | 10 | 10 | 0.5 | 30 | 9.6 | 100 | 10 | B |
H-RN4-10010 | 10 | 10 | 1 | 30 | 9.6 | 100 | 10 | B |
H-RN4-10020 | 10 | 10 | 2 | 30 | 9.6 | 100 | 10 | B |
H-RN4-12005 | 12 | 12 | 0.5 | 36 | 11.5 | 100 | 12 | B |
H-RN4-12010 | 12 | 12 | 1 | 36 | 11.5 | 100 | 12 | B |
H-RN4-12020 | 12 | 12 | 2 | 36 | 11.5 | 100 | 12 | B |
H-RN4-16010 | 16 | 16 | 1 | 40 | 15.5 | 150 | 16 | B |
H-RN4-16020 | 16 | 16 | 2 | 40 | 15.5 | 150 | 16 | B |
Type A: the cutting diameter is smaller than the shank diameter
Type B: the cutting diameter is equal to the shank diameter
Related products
Send Message
Most Recent
More
Other Products
Videos
