Tubing and Casing of Heavy Oil Thermal Recovery Well Manufacturer

Tubing and Casing of Heavy Oil Thermal Recovery Well

: http://heatshrink-tubing.com/1-3-2-heavy-wall-heat-shrink-tubing.html

Tubing and Casing of Heavy Oil Thermal RecoveryWell

Fastube tubing and casing of heavy oilthermal recovery well are developed by our company independently, to solve aseries of problems encountered during heavy oil thermal recovery. They utilizedirect reduction iron and scrap steel as raw material. CC billets are hotrolled into seamless pipe, and then quenched and tempered for great strength andtoughness.

Applications
These tubing and casing are suitable for continuous use in heavy oil thermalrecovery well, where the working temperature is up to 350℃.

Technical Specifications of Tubing and Casing of Heavy Oil Thermal RecoveryWell

Spec.		Outside diameter	Wall thickness		Type of end finish
Ⅰ	Ⅱ	mm	inch	mm	Steel grade
Ⅰ	Ⅱ	mm	inch	mm	FT80H	FT90H FT95H	FT110H
4-1/2	9.50	114.30	0.205	5.21	-	-	-
4-1/2	10.50	114.30	0.224	5.69	-	-	-
4-1/2	11.60	114.30	0.250	6.35	PLB	PLB	PLB
4-1/2	13.50	114.30	0.290	7.37	PLB	PLB	PLB
4-1/2	15.10	114.30	0.337	8.56	-	-	PLB
5	11.50	127.00	0.220	5.59	-	-	-
5	13.00	127.00	0.253	6.43	-	-	-
5	15.00	127.00	0.296	7.52	PLBE	PLBE	-
5	18.00	127.00	0.362	9.19	PLBE	PLBE	PLBE
5	21.40	127.00	0.437	11.10	PLB	PLB	PLB
5	23.20	127.00	0.478	12.14	PLB	PLB	PLB
5	24.10	127.00	0.500	12.70	PLB	PLB	PLB
5-1/2	14.00	139.70	0.244	6.20	-	-	-
5-1/2	15.50	139.70	0.275	6.98	-	-	-
5-1/2	17.00	139.70	0.304	7.72	PLBE	PLBE	PLBE
5-1/2	20.00	139.70	0.361	9.17	PLBE	PLBE	PLBE
5-1/2	23.00	139.70	0.415	10.54	PLBE	PLBE	PLBE
5-1/2	26.80	139.70	0.500	12.70	-	P	-
5-1/2	29.70	139.70	0.562	14.27	-	P	-
5-1/2	32.60	139.70	0.625	15.88	-	P	-
5-1/2	35.30	139.70	0.687	17.45	-	P	-
5-1/2	38.00	139.70	0.750	19.05	-	P	-
5-1/2	40.50	139.70	0.812	20.62	-	P	-
5-1/2	43.10	139.70	0.875	22.22	-	P	-
6-5/8	20.00	168.28	0.288	7.32	-	-	-
6-5/8	24.00	168.28	0.352	8.94	PLBE	PLBE	PLBE
6-5/8	28.00	168.28	0.417	10.59	PLBE	PLBE	PLBE
6-5/8	32.00	168.28	0.475	12.06	PLBE	PLBE	PLBE
7	17.00	177.80	0.231	5.87	-	-	-
7	20.00	177.80	0.272	6.91	-	-	-
7	23.00	177.80	0.317	8.05	PLBE	PLBE	-
7	26.00	177.80	0.362	9.19	PLBE	PLBE	PLBE
7	29.00	177.80	0.408	10.36	PLBE	PLBE	PLBE
7	32.00	177.80	0.453	11.51	PLBE	PLBE	PLBE
7	35.00	177.80	0.498	12.65	PLBE	PLBE	PLBE
7	38.00	177.80	0.540	13.72	PLBE	PLBE	PLBE
7	42.70	177.80	0.625	15.88	-	-	-
7	46.40	177.80	0.687	17.45	-	-	-
7	50.10	177.80	0.750	19.05	-	-	-
7	53.60	177.80	0.812	20.62	-	-	-
7	57.10	177.80	0.875	22.22	-	-	-
7-5/8	24.00	193.68	0.300	7.62	-	-	-
7-5/8	26.40	193.68	0.328	8.33	PLBE	PLBE	-
7-5/8	29.70	193.68	0.375	9.52	PLBE	PLBE	PLBE
7-5/8	33.70	193.68	0.430	10.92	PLBE	PLBE	PLBE
7-5/8	39.00	193.68	0.500	12.70	PLBE	PLBE	PLBE
7-5/8	42.80	193.68	0.562	14.27	PLB	PLB	PLB
7-5/8	45.30	193.68	0.595	15.11	PLB	PLB	PLB
7-5/8	47.10	193.68	0.625	15.88	PLB	PLB	PLB
7-5/8	51.20	193.68	0.687	17.45	-	P	-
7-5/8	55.30	193.68	0.750	19.05	-	P	-
7-3/4	46.10	196.85	0.595	15.11	P	P	P
8-5/8	24.00	219.08	0.264	6.71
8-5/8	28.00	219.08	0.304	7.72	-	-	-
8-5/8	32.00	219.08	0.352	8.94	-	-	-
8-5/8	36.00	219.08	0.400	10.16	PLBE	PLBE	-
8-5/8	40.00	219.08	0.450	11.43	PLBE	PLBE	PLBE

Fastubeis a Chinatubing and casing manufacturer and supplier. We offer tubing and casing, andwelded steel tube for low pressure purposes, cold formed welded steel pipe, Our high quality products are offered at competitive prices.Fastube is located in China,and the full chain of manufacturing electric resistance welded tubing, driveshaft pipe, can be completed in China,even in one city. Lower manufacturing cost saves your purchasing cost. The moredetails of each product are shown on the page with description.