Rear Loader
Dongfeng rear loader is a loader that is designed for the rear of your tractor. It can be installed and removed through the ease of any other 3-point hitch attachment. Our rear loader can perform the functions of a front end loader, such as digging. Besides, it can raise the load to a height of 60 inches for easy loading.
Our rear loader is of unique design and compact structure. The added weight of the loader will increase stability through better weight distribution and provide greater traction at the rear wheels, thus eliminating the need for adding weights to the rear wheels. The height of the boom can be adjusted by the varying length of the top link.
Options
Our rear loader can be built in (with) two bucket dumping configurations. The most economical one is the trip mechanism option, where the bucket is gravity dumped by the release of a lever, requiring only one hydraulic cylinder. The second option needs a second hydraulic cylinder to allow the bucket to be angled to any point throughout its range of motion. Both options are described in detail in the drawing package.
If your tractor does not have hydraulic remote outputs, a 12-volt hydraulic power pack can be used to actuate the cylinder(s). There are several types of 12-volt hydraulic power packs, such as single acting, double acting and dual cylinder, each with optional remote control wiring. If your tractor has hydraulic remote outputs, this power source can be utilized to operate the boom and bucket.
The single acting 12-volt hydraulic power pack offers power up, gravity down and requires only one hose. The double acting 12-volt hydraulic power pack offers power up and power down. Rear loader can be configured to give power down so the weight of rear loader can be placed on the bucket. This system requires two hoses to connect the power pack or tractor to the cylinder.
