AP Pure Sine Wave Inverter
AP Pure Sine Wave Inverter
Features
1. EYEN AP Pure Sine Wave Inverter is a combination of an inverter, battery charger and AC auto-transfer switch into one complete system with its conversion efficiency being 80%.
2. Designed to use with AC electricity supplied from the generator or grid, it allows any surplus AC power to pass through to power downstream AC loads. When AC power is available, the inverter will recharge the batteries. When AC power is disconnected, the unit converts DC battery power into AC electricity.
3. This pure sine wave inverter is packed with features and it is one of the most advanced chargers in the market today. It features power factor correction, sophisticated multi-stage charging and pure sine wave output with unprecedented high surge capability to meet the power needs of inductive loads without damaging the equipment.
4. The high surge capacity of this pure sine wave inverter is 3 times of rated power, which enables it to run more difficult inductive loads and handle overload conditions.
5. Combined with a more sophisticated multi-stage battery charging algorithm, the max charging of the new power factor correction (PFC) rates to70A, which reduces electricity draw and generator run-time.
6. The built-in transfer switch of this pure sine wave inverter can automatically transfer between inverter power and incoming AC power in 10ms.
7. This inverter comes with durable power coating and corrosion resistant steel chassis Options.
8. It is designed with various protections including over / under voltage, overload, over-temperature and short-circuit protections, etc.
9. There's no battery in the bypass path.
10. The accessories of this pure sine wave inverter adopt remote control panel and 1 meter of battery cable.
Features
1. EYEN AP Pure Sine Wave Inverter is a combination of an inverter, battery charger and AC auto-transfer switch into one complete system with its conversion efficiency being 80%.
2. Designed to use with AC electricity supplied from the generator or grid, it allows any surplus AC power to pass through to power downstream AC loads. When AC power is available, the inverter will recharge the batteries. When AC power is disconnected, the unit converts DC battery power into AC electricity.
3. This pure sine wave inverter is packed with features and it is one of the most advanced chargers in the market today. It features power factor correction, sophisticated multi-stage charging and pure sine wave output with unprecedented high surge capability to meet the power needs of inductive loads without damaging the equipment.
4. The high surge capacity of this pure sine wave inverter is 3 times of rated power, which enables it to run more difficult inductive loads and handle overload conditions.
5. Combined with a more sophisticated multi-stage battery charging algorithm, the max charging of the new power factor correction (PFC) rates to70A, which reduces electricity draw and generator run-time.
6. The built-in transfer switch of this pure sine wave inverter can automatically transfer between inverter power and incoming AC power in 10ms.
7. This inverter comes with durable power coating and corrosion resistant steel chassis Options.
8. It is designed with various protections including over / under voltage, overload, over-temperature and short-circuit protections, etc.
9. There's no battery in the bypass path.
10. The accessories of this pure sine wave inverter adopt remote control panel and 1 meter of battery cable.
Technical Parameters of AP Pure Sine Wave Inverter
Model | AP2012 | AP2024 | AP3012 | AP3024 |
Input Voltage Waveform | Sinusoidal (utility or generator) | |||
Nominal Input Voltage | 230VAC | |||
Low Line Disconnect | 184VAC±4% | |||
High Line Disconnect | 253VAC±4% | |||
Max. AC Input Voltage | 270Vrms | |||
Nominal Input Frequency | 50Hz/60Hz (Auto detection) | |||
Over-load Protection (SMPS load) | Circuit breaker | |||
Output short circuit protection | Circuit breaker | |||
Efficiency (Line Mode) | >95% | |||
Transfer Switch Rating | 30A | |||
Transfer Time(Ac to Dc) | 20ms (typical) | |||
Output Voltage Waveform | Sine wave | |||
Rated Output Power (w) | 2000 | 2000 | 3000 | 3000 |
Power Factor | 0~1.0 | |||
Nominal Output Voltage (V) | 230VAC | |||
Output Voltage Regulation | ±10%rms | |||
Nominal Efficiency | >80% | |||
Nominal DC Input Voltage | 12V | 24V | 12V | 24V |
Nominal Charge Regulation | 70A | 35A | 70A | 35A |
Charge Current Regulation | ±5Adc | |||
Battery initial voltage | 0-15.7Vdc (can operate with 0 V battery) | |||
Communication | RJ11 (Used for factory testing. No customer interface available) | |||
Safety Certification | Compliance with UL458 | CE(EN60950) | ||
EMI Classification | FCC,CLASS A | EN50091-2,CLASS A | ||
Operating Temperature Range | 0℃~40℃ | |||
Storage temperature | -15℃~60℃ | |||
Operation humidity | 5% to95% | |||
Audible Noise | Max. 60dB | |||
Cooling | Forced air, variable speed fan | |||
Size | 381mm*217mm*179mm |
Related products
Send Message
Most Recent
More
Other Products
Videos