Round Pin Anchor Shackle

: http://shenli-rigging.com/4-5-round-pin-anchor-shackle.html

Features
● It can be used for lifting.
● It is forged and then heat treated.
● The shackle is made of medium carbon steel; the pin is made of alloy steel.
● The surface treatment of shackle: hot galvanizing/cold galvanizing.
● Pin surface treatment: hot galvanizing/cold galvanizing/plastic spraying.
● It can not be used for side pulling.
● Ultimate load is 6 times the Working Load Limit.
● It can not be used beyond working load limit.

SLR121-ROUND PIN ANCHOR SHACKLES

Parameters (Unit: mm)

Item Code	Weight/lbs	Working Load Limit/t	Breaking Load/t	A±1	C±1.2	D±0.5	L±2
SLR-121-1/4	0.13	0.5	3	11.9	19.8	6.35	46.8
SLR-121-5/16	0.18	0.75	4.5	13.5	21.4	8	53
SLR-121-3/8	0.29	1	6	16.8	26	9.7	63.2
SLR-121-7/16	0.389	1.5	9	19	29.5	11.2	78
SLR-121-1/2	0.71	2	12	20.6	33	12.7	83
SLR-121-5/8	1.50	3.25	19.5	27	43	17.5	106.5
SLR-121-3/4	2.32	4.75	28.5	32	51	20.6	126.5
SLR-121-7/8	3.49	6.5	39	36.6	58	24.6	148
SLR-121-1	5.00	8.5	51	43	68.4	27	166.6
DLR-121-1-1/8	6.97	9.5	57	46	74	31.7	190
SLR-121-1-1/4	9.75	12	72	51.6	82.6	35	29.6
SLR-121-1-3/8	13.25	13.5	81	57	92	38	232.7
SLR-121-1-1/2	17.25	17	102	60.5	98.6	41.2	254
SLR-121-1-3/4	29.46	25	150	73	127	57.2	313.5
SLR-121-2	45.75	35	210	82	146	61	347.5

SLR122-ROUND PIN ANCHOR SHACKLES

Parameters (Unit: mm)

Item Code	Weight/lbs	Working Load Limit/t	Breaking Load/t	A±1	D±0.5	L±2
SLR-122-1/4	0.13	0.5	3	11.9	6.4	40.4
SLR-122-5/16	0.23	0.75	4.5	13.5	8	48.5
SLR-122-3/8	0.33	1	6	16.8	9.7	58.7
SLR-122-7/16	0.49	1.5	9	19	11	67.8
SLR-122-1/2	0.75	2	12	20.6	12.7	77
SLR-122-5/8	1.47	3.25	19.5	27	16	95.5
SLR-122-3/4	2.52	4.75	28.5	32	20.6	115
SLR-122-7/8	3.85	6.5	39	36.6	24.6	135.4
SLR-122-1	5.55	8.5	51	43	25.4	151
DLR-122-1-1/8	7.60	9.5	57	46	31.7	172
SLR-122-1-1/4	10.81	12	72	51.6	35	190.5
SLR-122-1-3/8	13.75	13.5	81	57.2	38	210.3
SLR-122-1-1/2	18.5	17	102	60.5	41.2	230
SLR-122-1-3/4	31.4	25	150	73	53.8	278.7
SLR-122-2	46.75	35	210	82.6	60	323.6