On Grid Solar Inverter

On Grid Solar Inverter

Sunny Way SW series on grid solar inverter is designed to convert DC from PV modules into AC to power the load when the PV array is producing enough energy. It will switch automatically to feed the extra power to grid through a meter. Once the solar power is inadequate, the inverter will draw power from grid to power the load. You can apply the Sunny Way SW in single-phase or three-phase on grid as well as upgrade the systems at any time.
Unique Features
1. This on grid solar inverter detects islanding with active frequency offset, which improves grid-connection safety.
2. It applies high frequency link based on DSP (Digital Signal Processing) control technology. In addition, it is connectable in parallel,modularly extendable and extremely flexible for system configuration.
3. As it adopts the Mitsubishi IPM module of the 5th generation, this on grid solar inverter is impressively efficient. It also adopts self-optimizing MPPT to enhance the efficiency of PV system.
4. It employs LCD (Large Multilingual Graphic) and features simple configuration via keys with the configurable output voltage setup for world wide implementation.
5. This on grid solar inverter takes use of software calibration from DSP, which ensures a power factor of approximately 100%. Besides, the power production and CO2 emission reduction have been calculated up to 5 years.
6. Its full protections against every possible accident improve safety and reliability. In addition, it adopts easy commissioning from specialized remote setting and detecting software.
7. This on grid solar inverter adopts electrophoresis painting and clean design of IP65 protection rating which is suitable for both indoor and outdoor installation

Parameters

Technical Data SW1K / 1S SW4K8 / 1S SWT4K8 / 1S SWT10K / 1S
Input (DC)



Max. DC power 1050 W 5250 W 5250 W 10500 W
Max. DC Voltage 270 V 270 V 270 V 270 V
MPP Voltage Range 180~360 V 180~360 V 180~360 V 180~360 V
Max. PV Input DC Current 7 A 31 A 30.9 A 61.76 A
Number of MPP Trackers / Strings per MPP Tracker 1 / 1 1 / 2 1 / 2 1 / 3





Output (AC)



AC Nominal Power 1000 W 4800 W 5000 W 10000 W
Max. Output Current 5.45 A 26.18 A 9.09 A 18.18 A
Nominal AC Voltage / Range 220 V / 220 V±20% 220 V / 220 V±20% 380 V / 380 V±20% 380 V / 380 V±20%
Nominal AC Grid Frequency / Range 50 Hz / ±0.5 Hz 50 Hz / ±0.5 Hz 50 Hz / ±0.5 Hz 50 Hz / ±0.5 Hz
Power Factor @ Rated Power ≥0.99 ≥0.99 ≥0.99 ≥0.99
Output Current THD @ Rated Power <5% <5% <5% <5%





Efficiency



Max. Efficiency / Euro-Eta 97.0% / 95.5% 97.0% / 95.5% 97.0% / 95.5% 97.0% / 95.5%





Protection Devices



Anti-Islanding
DC Reverse Polarity Protection
AC Short-Circuit Protection
Ground Fault Monitoring
All-Pole Sensitive Residual-Current Monitoring Unit
Over Load Protection
Over / Under Voltage Protection
Over / Under Frequency Protection
Over Current Protection





Mechanical Data



Dimensions (H / W / D) in mm 404×250×150 435×270×172 510×315×183 695×648×232
Weight 10.5 kg 16 kg 22 kg 45 kg
Operating Temperature Range -25~ 50℃ 25~ 50℃ 25~ 50℃ 25~ 50℃
Noise Emission (Typical) ≤ 42 dB (A) ≤ 42 dB (A) ≤ 42 dB (A) ≤ 42 dB (A)
Internal Consumption (Night) 0.25W 0.25W 0.25W 0.25W
Topology Transformerless Transformerless Transformerless Transformerless
Cooling Concept Convection Convection Convection Convection
Electronics Protection Rating IP65 IP65 IP65 IP65





Features



LCD Graphic Graphic Graphic Graphic
Interfaces RS485 / RS232 RS485 / RS232 RS485 / RS232 RS485 / RS232
Warranty 5 Years 5 Years 5 Years
Certificates& Permits AS4777 TUV UL AS4777 TUV UL AS4777 TUV UL AS4777 TUV UL
AS4777 TUV UL is expected to be obtained in June 2011.

 

Related products
Send Message